JBL Wind 2 (JBLWIND2) - Инструкция по эксплуатации - Страница 4

4

Getting Started 

Two easy steps to get your JBL WIND 2 ready to enjoy. 

Step 1: Charging before use 

Connect  your  WIND 2 BT

  Speaker  to  a  USB  power  source

  using  the enclosed 

USB charging cable. 

Step 2: Connecting to play 

•

Bluetooth connection

•

Direct Connection  

As soon as the portable WIND 2 box is turned on, the BT indicator will blink and

signal to confirm that the unit is currently in BT pairing mode. Access the BT
settings on your phone, tablet or computer to locate the device called "JBL

WIND 2" and press to select. A signal will be issued to confirm that the device

has been satisfactorily paired in seconds. The next time you use the WIND 2

device, the product will automatically connect to your devices once pairing

has been performed. To disconnect the device, press the "Play / Pause"
button for 5 seconds and it will start pairing a new available device.

OBS.: This process needs to be performed only on first use.

region as soon as your radio is ready for use.

press the "Play / Pause" button up to start scanning th FM radios of your

When you turn on your JBL WIND 2 for the first time, after playing the radio,

Click the "+" and "-" buttons to advance and return the radios respectively.

beep, it will start playing the FM radio.

As soon as WIND 2 is turned on, press the source select button again, after the

•

FM Radio connection

The WIND 2 Portable Box can also connect to devices that have a handset
output or a line-out using the AUX cable shipped with the device.

•

Micro SD / TF card

Play your music through a micro SD / TF card. Click the "source" button to
switch between signal inputs.