Tefal IH210801 - Инструкция по эксплуатации - Страница 15

15

EN

 FRY Mode  

• This mode fries food in a large quantity of oil - maximum 2 L.
• Below are the power levels and oil temperatures that correspond to 

each program:

P1

P2

P3

P4

P5

P6

P7

1200 W

1200 W

1400 W

1400 W

1600 W

1800 W

2100 W

100 °C

120 °C

140 °C

160 °C

180 °C

200 °C

220 °C

• The timer is available in Fry Mode:

Default time

Maximum time

15 min

180 min

CLEANING

ERROR CODES

You must disconnect the power lead, wait until the ceramic glass plate 
has cooled, then follow the instructions below to clean the appliance:
1. Ceramic glass plate: if the ceramic glass plate is very dirty, clean 
using a damp non-abrasive sponge or for more stubborn stains use an 
appropriate cleaning product which is designed for use on ceramic hobs. 
2. Cooker body and control panel: Use a damp soft cloth to clean. In case 
of any oil stains that are not easily removed, wipe away the stains with 
a soft cloth rinsed in warm water and a little washing-up liquid and then 
clean using a damp soft cloth.
3. Air entry/air exit surface: remove any dust with a cotton bud.

•  Receptacle missing or not the correct type: 
If the pot base diameter is less than 10 cm or if the pot material is 
unsuitable, the buzzer will sound and the digital display shows “E1”. 
Change the cookware. 
•  Protection of the power source against overheating:
If the power source overheats, the induction cooking appliance cuts 
off the incoming power supply and the screen displays “E2”. Allow the 
hotplate to cool: if the defect persists, please contact the customer service.
•  Over or under- voltage protection: 
If the voltage is greater than 265 V - 285 V, the incoming power supply for