Smeg CS19A-7 - Инструкция по эксплуатации - Страница 37

Instructions for the user

89

Refer to the following diagram for setting the cleaning cycle duration:

CLEANING
DURATION

LIGHT DIRT

MEDIUM DIRT

HEAVY DIRT

120 MIN.

165 MIN.

210 MIN.

During the automatic cleaning cycle, the fans produce a more intense level of
noise due to a greater rotation speed; this is entirely normal and intended to
facilitate heat dissipation.
At the end of pyrolysis, the fans will continue to operate for long enough to avoid
overheating the walls of adjacent units and the front of the oven.

9.10.2 Setting the cleaning cycle

Turn the function selection knob to 

 to select the cleaning cycle.

Press and hold down key 

; press keys 

 or 

 to set the cycle duration.

The setting varies between a minimum of 1h 30m and a maximum of 3h 00m.

Two minutes after the cleaning cycle (Pyrolysis) starts, a door
locking device will be tripped, preventing the door from being
opened. The appropriate light will switch on to indicate that the
locking device has been activated.

At the end of the cleaning cycle the door locking device will remain active until
the temperature inside the oven has reached a safety threshold. When the oven
has cooled down, collect the residues from automatic cleaning with a damp
microfibre cloth.

To select a cleaning cycle with a delayed start, after setting the duration press

. The time when the cleaning cycle will terminate will appear on the display.

Press and hold down key 

, and press keys 

 or 

 to set the time at

which you wish to terminate the cleaning cycle.

It is not possible to select any functions once the door locking device has been

activated. Wait for 

 to go out.