STATUS MPR33 - Инструкция по эксплуатации - Страница 2

MPR33

3

                                  
                                  WARNING !
                                  Read and understand all instructions. 
                                  Failure to follow all instructions listed below, may result  
                                  in electric shock, fire and/or serious personal injury.
                                  SAVE THESE INSTRUCTIONS
WORK AREA
• Keep your work area clean and well lit. 

Cluttered benches and dark areas invite 

  accidents.

• Do not operate power tools in explosive atmospheres, such as in the presen-
  ce of flammable liquids, gases, or dust. 

Power tools create sparks which may 

  ignite the dust or fumes.

• Keep by-standers, children, and visitors away while operating a power tool. 
ELECTRICAL SAFETY
• Hold the power tool by insulated gripping surfaces only, when performing   
  an operation where the cutting accessory may contact hidden wiring or its 
  own cord. 

Cutting accessory contacting a "live" wire may make exposed metal 

  parts of the power tool "live" and could give the operator an electric shock.

• Before plugging in the tool, be certain the outlet voltage supplied is within 
  the voltage marked on the nameplate.

 Do not use “AC only” rated tools with a 

  DC power supply.

• Avoid body contact with grounded surfaces such as pipes, radiators, ranges 
  and refrigerators.

 There is an increased risk of electric shock if your body is 

  grounded. If operating the power tool in damp locations is unavoidable, a Ground 
  Fault Circuit Interrupter must be used to supply the power to your tool. Electrician's 
  rubber gloves and footwear will further enhance your personal safety. 

• Don't expose power tools to rain or wet conditions.

 Water entering a power 

  tool will increase the risk of electric shock.

•

Do not abuse the cord.

 Never use the cord to carry the tools or pull the plug from 

  an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace 
  damaged cords immediately. Damaged cords increase the risk of electric shock.

• When operating a power tool outside, use an outdoor extension cord marked 
  "W-A" or "W".

 These cords are rated for outdoor use and reduce the risk of 

  electric shock. 

PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating 
  a power tool. Do not use tool while tired or under the influence of drugs, 
  alcohol, or medication. 

A moment of inattention while operating power tools may 

  result in serious personal injury.

• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. 
  Keep your hair, clothing, and gloves away from moving parts. 

Loose  clothes, 

  jewelry, or long hair can be caught in moving parts. Keep handles

dry, clean and

  free from oil and grease.

 1. POWER TOOL SAFETY RULES

POWER TOOL SAFETY RULES