Makita DHR241RFE - Инструкция по эксплуатации - Страница 5

5 

ENH101-15 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine:   
Cordless Combination Hammer 
Model No./ Type: DHR241 
are of series production and 

Conforms to the following European Directives: 

2006/42/EC 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd. 
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England 
 

30.1.2009 

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, 446-8502, JAPAN 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and instructions for 
future reference. 

GEB046-2 

CORDLESS ROTARY HAMMER 
SAFETY WARNINGS 

1. 

Wear ear protectors.

 Exposure to noise can 

cause hearing loss. 

2. 

Use auxiliary handle(s), if supplied with the 
tool.

 Loss of control can cause personal injury. 

3. 

Hold power tool by insulated gripping 
surfaces, when performing an operation 
where the cutting accessory may contact 
hidden wiring.

 Cutting accessory contacting a 

"live" wire may make exposed metal parts of the 
power tool "live" and could give the operator an 
electric shock. 

4. 

Wear a hard hat (safety helmet), safety 
glasses and/or face shield. Ordinary eye or 
sun glasses are NOT safety glasses. It is also 
highly recommended that you wear a dust 
mask and thickly padded gloves. 

5. 

Be sure the bit is secured in place before 
operation. 

6. 

Under normal operation, the tool is designed 
to produce vibration. The screws can come 
loose easily, causing a breakdown or accident. 
Check tightness of screws carefully before 
operation. 

7. 

In cold weather or when the tool has not been 
used for a long time, let the tool warm up for a 
while by operating it under no load. This will 
loosen up the lubrication. Without proper 
warm-up, hammering operation is difficult. 

8. 

Always be sure you have a firm footing. 
Be sure no one is below when using the tool 
in high locations. 

9. 

Hold the tool firmly with both hands. 

10. 

Keep hands away from moving parts. 

11. 

Do not leave the tool running. Operate the tool 
only when hand-held. 

12. 

Do not point the tool at any one in the area 
when operating. The bit could fly out and 
injure someone seriously. 

13. 

Do not touch the bit or parts close to the bit 
immediately after operation; they may be 
extremely hot and could burn your skin. 

14. 

Some material contains chemicals which may 
be toxic. Take caution to prevent dust 
inhalation and skin contact. Follow material 
supplier safety data. 

SAVE THESE INSTRUCTIONS. 

WARNING: 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to safety rules for the subject product. MISUSE or 
failure to follow the safety rules stated in this 
instruction manual may cause serious personal 
injury. 

ENC007-7 

IMPORTANT SAFETY 
INSTRUCTIONS 
FOR BATTERY CARTRIDGE 

1. 

Before using battery cartridge, read all 
instructions and cautionary markings on (1) 
battery charger, (2) battery, and (3) product 
using battery. 

2. 

Do not disassemble battery cartridge. 

3. 

If operating time has become excessively 
shorter, stop operating immediately. It may