Bosch GBH 2 24 D 06112 A 0000 - Инструкция по эксплуатации - Страница 9

 English | 

9

Bosch Power Tools

1 619 929 E68 | (25.7.11)

Personal safety

f

Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a power 

tool while you are tired or under the influence of drugs, 

alcohol or medication. 

A moment of inattention while op-

erating power tools may result in serious personal injury.

f

Use personal protective equipment. Always wear eye 

protection. 

Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal inju-

ries.

f

Prevent unintentional starting. Ensure the switch is in 

the off-position before connecting to power source 

and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the switch or en-

ergising power tools that have the switch on invites acci-

dents.

f

Remove any adjusting key or wrench before turning 

the power tool on. 

A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.

f

Do not overreach. Keep proper footing and balance at 

all times. 

This enables better control of the power tool in 

unexpected situations.

f

Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from 

moving parts. 

Loose clothes, jewellery or long hair can be 

caught in moving parts.

f

If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are con-

nected and properly used. 

Use of dust collection can re-

duce dust-related hazards.

Power tool use and care

f

Do not force the power tool. Use the correct power tool 

for your application. 

The correct power tool will do the 

job better and safer at the rate for which it was designed.

f

Do not use the power tool if the switch does not turn it 

on and off. 

Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.

f

Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.

f

Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool or 

these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.

f

Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation. If 

damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 

tools.

f

Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 

and are easier to control.

f

Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account 

the working conditions and the work to be performed. 

Use of the power tool for operations different from those 

intended could result in a hazardous situation.

Service

f

Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Hammer Safety Warnings

f

Wear ear protectors. 

Exposure to noise can cause hear-

ing loss.

f

Use auxiliary handle(s), if supplied with the tool. 

Loss 

of control can cause personal injury.

f

Hold the tool by the insulated gripping surfaces when 

performing operations where the application tool or 

the screw could contact hidden wiring or its own power 

cord. 

Contact with a “live” wire will also make exposed 

metal parts of the power tool “live” and shock the operator.

Products sold in GB only

: Your product is fitted with a 

BS 1363/A approved electric plug with internal fuse (ASTA 

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be 

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should 

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible 

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only

: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Additional Safety and Working In-

structions

f

Observe the mains voltage! 

The voltage of the power 

source must correspond with the data on the type plate of 

the machine.

f

Use appropriate detectors to determine if utility lines 

are hidden in the work area or call the local utility com-

pany for assistance. 

Contact with electric lines can lead 

to fire and electric shock. Damaging a gas line can lead to 

explosion. Penetrating a water line causes property dam-

age.

f

Firmly tighten the auxiliary handle, hold the machine 

firmly with both hands while working and keep proper 

footing and balance at all times. 

The machine is securely 

guided with both hands.

f

Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

f

For drilling without impact in wood, metal, ceramic and 

plastic as well as for screwdriving, tools without SDS-plus 

are used (e. g., drills with cylindrical shank). For these 

tools, a keyless chuck or a key type drill chuck are re-

quired.

OBJ_BUCH-1426-001.book  Page 9  Monday, July 25, 2011  12:44 PM