Печи Lumme LU-1708 Vinous Garnet - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
8
Switch on all heating elements by selecting heating mode
, set the maximum temperature to 230°C and timer for 15 minutes. Some smoke or odour may be produced at the first switch-
on, this is normal and not a malfunction. At the end of this cleaning procedure, let the unit cool down, after which it will be ready for operation.
USING THE APPLIANCE
SWITCHING ON
Make sure the device is switched off (all three knobs are in the «Выкл/OFF» position).
Connect the device to the power supply.
Install a bake tray and/or wire rack, place the food. If the food is cooked on the wire rack, place the bake tray on the bottom level to prevent oil/grease/juice droplets from getting onto the heated
surfaces.
To switch the device on, turn the temperature adjustment knob "3" to set the desired temperature from 70 to 230°C.
Then turn the heating mode selection knob "4" to set one of the 3 heating modes.
Set the timer from 0 to 60 minutes by turning the timer setting knob "5".
The light indicator "6" will illuminate and the device starts working.
After the set time has elapsed, an audible signal will sound, the indicator light will go out, and the device will stop working.
If the products are not ready yet, set the additional operating time by turning the timer knob. DO NOT USE THE APPLIANCE MORE THAN 4 HOURS WITHOUT A BREAK.
HEATING MODE SELECTION
To set the desired heating mode, turn the heating mode adjustment knob "4" to one of the positions:
- the upper heating elements work mode.
- the lower heating elements work mode.
- the upper & lower heating elements work mode.
- all heating elements are off.
TIMELESS OPERATION
Turn the timer knob to the left of the OFF position to the range indicated by the symbol
, then the device will operate without time limit..
Set the desired temperature from 70 to 230°C and one of the 3 heating modes.
The light indicator will illuminate and the device will start working.
To turn off the device, turn the heating mode adjustment, temperature adjustment and timer knobs to the "ВЫКЛ/OFF" position, an audible signal will sound, the light indicator will go out, the device
will stop working.
CAUTION:
DO NOT LEAVE THE DEVICE UNATTENDED WHEN OPERATING IN THE "TIMERLESS OPERATION " MODE!
DO NOT USE THE APPLIANCE MORE THAN 4 HOURS WITHOUT A BREAK.
