Ardesto MEO-N52CW - Инструкция по эксплуатации - Страница 22

EN

22

•  Remove any packaging material and marketing stickers from 

the oven.

•  Place the appliance on a fully horizontal surface in order 

to achieve easy and correct using. The table top should be 

heat-proof and the furniture in contact with the oven must 

be heat resistant.

•  Do not block any ventilation openings. For sufficient 

ventilation, there must be a space of at least 750 mm above 

the oven and 100 mm on each side.

•  Check if the door of the appliance can be opened freely. 

•  For the connection of the oven you will need a 230V supply 

socket protected with a 16A fuse, and provided with a 

suitable ground contact. 

•  In case you should need an extension cable it must be 

3x2,5mm

2

 at least and the continuity of its ground connector 

must be checked. If the indication lamps show a slight 

twinkling light when the switches are in position “0” then 

inverse the plug in the socket.  

•  Don’t cut the plug from the supply cord. This device was 

not designed for a permanent connection with the mains 

supply. Remove the plug from the wall socket after each use.

BEFORE THE  FIRST TIME  USE

•  Before using the oven for the first time, heat it empty with 

the door closed at a temperature of 200 °C for about 30 

minutes until the characteristic smell evaporates. It should 

be done in a well-ventilated room. This smell is caused by 

the insulation material and will disappear soon. At the end, 

return the thermostat to position 0.