Печи AENO EO1 (AEO0001) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
grill)
24 Temperature control. Press to activate the temperature indicator, then adjust
temperature with buttons (25) and (27)
25 Reducing time or temperature (one short press – one-unit increment, long
press – continuous reducing until the button is released)
26 Start/Pause:
Press to switch on the oven.
After selecting the mode, time and temperature, press to start the
program.
During cooking, press to interrupt the program execution, and activate
the control panel by botton (28) firstly, and then change the mode and/or
program setting. If the stop time exceeds 5 minutes, the oven enters standby
mode.
Press to start or pause the program: the first press will start the program,
the second will pause the program
27 Increasing time or temperature (one short press – one-unit increment, long
press – continuous increasing until the button is released)
28 Activating the control panel. The panel is active for 3 seconds after pressing the
button. If there is no action, the oven will go into power off.
Turn on or turn off power. If you want to turn off the oven during cooking, need
to pause the program firstly by botton (26), and then the first press botton (28)
will re-activate the control panel, the second will turn off the oven
Limitations and Warnings
WARNING! This appliance is designed for domestic use only, industrial use is
not considered as intended use and results in breach of warranty.
Before connecting the device to the mains make sure that the mains
parameters correspond to the technical specifications. To prevent grease
building, clean the oven with a cloth or sponge after each use. Allow the device
to cool completely before cleaning. For cleaning, you can use a sponge/cloth
dampened with soapy water or liquid/creamy cleaners designed for stainless
steel. The use of abrasive cleaning agents and sharp objects is prohibited.
