Bort BDR-2500-RR-Iron - Инструкция по эксплуатации - Страница 5

5

shut off the power.

Red light show on it means short of 

water. 

  The green light will be on and off dur-

ing usage, it will not influence any use 

when green light off. 

Adding water to the tank during 

operation

·Unplug the appliance by unplugging 

the plug from the outlet.

Caution: Before removing the safety 

cover, press the steam button,

to relieve residual pressure!

Slowly turn the safety cover, but do not 

remove it, residual steam will

Gradually go out until it all comes out. 

Then place the appliance in a cool place 

and let it cool down for three minutes. 

Only then, completely unscrew the lid.

Using a measuring cup, pour the re-

quired amount of cold orhot water.

Firmly tighten the safety cover on the 

device. If you want to continue use, just 

add water in the tank directly (for BDR-

2500RR only)  

4. 

Storage & Cleaning

After use, please turn the power off.

If the steam has not fully released, please 

keep your thumb on the steam button 

until no steam can be released. 

If there is dirt on the surface of body, 

please use dry dishcloth with some 

water to wipe gently.

Do not use water to spray the 

machine.

Don’t place it under damp which 

may

cause short circuit.

You can install the cord rewinder on the 

back of unit and  assemble the power 

cord on it.

The steam gun can be put on the handle 

directly.

After cleaning please keep i

t in a dark 

and dry place.