Парогенераторы Tefal SV8055 Express Anti-calc - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

5
Semi-automatic self-cleaning procedure*
Never start the self-cleaning procedure when the appliance is on its base.
Always place the iron on its cleaning stand, over a sink drain.
Ensure that the scale collector* is installed in the iron and properly locked, prior to starting self-cleaning.
Never touch the iron or its cleaning stand during self-cleaning. The cleaning accessory may still be hot; wait at least 15
minutes before handling it.
The cleaning stand is only intended for self-cleaning.
Never use this accessory as an iron holder during normal use.
*depending on the model
PLEASE RETAIN THIS INSTRUCTION
BOOKLET FOR FUTURE REFERENCE
Environment protection first !
i
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
A problem with your appliance ?
PROBLEMS
CAUSES
SOLUTIONS
Your iron is producing little or no
steam.
You have just filled the tank or
changed the anti-calc cartridge, or
you have just started using it.
Press the steam control button conti-
nuously for few minutes pointing
it away from your linen, in order to
prime the pump.
There is no anti calc cartridge in
the appliance or it is not properly
installed.
Make sure the anticalc cartridge
is installed and locked in its com-
partment.
Steam cannot be produced at the
temperature you have selected.
Set the thermostat control in the
coloured zone (••• or MAX).
The water tank is empty.
Fill the tank.
Water runs out of the holes of the
soleplate.
You are using steam for the first
time or you have not used it for
some time.
Press on the steam control button
away from your ironing board until
the iron produces steam.
The setting is not correct (1 dot / 2
dots) and the soleplate is not hot
enough to produce steam.
Set the iron at 3 dots (••• or MAX)
and wait for the iron thermostat light
to go out before activating the steam
button again.
Water streaks appear on
the linen.
Your ironing board is saturated with
water because it is not suitable for
use with an appliance.
Check that your ironing board is
suitable. We recommend that you
use a vented/mesh type ironing
board.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)