Braun IS7144BK - Инструкция по эксплуатации - Страница 11

(A) Filling the water tank

• 

Make sure that the appliance is switched off and 

the system is unplugged.

• 

Remove the water tank (6).

• 

Fill the water tank with tap water, taking care not to 

exceed the  “max” level but at least up to the mark 

“min” otherwise the appliance will not be ready to 

start steam ironing. If you have extremely hard 

water, we recommend that you use a mixture of 

50 % tap water and 50 % distilled water.

• 

Never use distilled water exclusively. Do not add 

any additives (e.g. starch). Do not use 

condensation water from a tumble dryer.

• 

Insert the water tank. 

• 

Place the appliance on a stable, level surface. 

Note:

If you use filtering devices, make absolutely sure the 

water obtained is neutral ph.

Water reserve function

• 

When the water level is becoming low, the icon 

starts flashing. At this stage it is possible to 

continue steam ironing for about 10-15 minutes. 

• 

When the icon   turns permanently on, it 

becomes necessary to refill the tank. At the same 

time, the temperature control LED (12) is flashing 

and the icon related to the selected setting turns off. 

• 

To continue steam ironing, refill the water tank (A).

(B) Start ironing

• 

Place the iron on the iron rest (5) or on its heel 

rest (15), plug in the appliance and press the On/

Off button (2).

• 

Select the setting (3) most suitable for the 

garments to be ironed.

• 

The iron will start to heat up and the temperature 

control LED (12) on the iron will flash.

• 

The related icon for the setting in the display (1) 

will start to flash. When steam is ready the icon 

turns permanently on. 

• 

Once the temperature setting is reached, the 

temperature control LED (12) is permanently on.

•  Settings: 

 The requested setting can be chosen 

by pressing the corresponding button (eco, 

normal or turbo). To switch from one setting to 

another press the dedicated button (3).

CareStyle 7 

eco 

It is suggested for most delicate garments like 

synthetics, silk and blended fabrics for which you 

need less steam. This setting allows less power 

consumption.

normal

It is suggested for garments like wool, polyester and 

cotton/linen.  

Note:

The normal setting 

 is automatically 

chosen when the appliance is switched on for the 

first time, from 2

nd

 switch on, it will be set to the last 

setting chosen. 

CareStyle 7 Pro

eco 

It is suggested for most delicate garments like 

synthetics, silk and blended fabrics. This setting 

allows less power consumption

normal

It is suggested for garments like wool, polyester and 

cotton.

turbo

+

It is suggested for garments that need more 

powerful steam, like thick cotton/linen and jeans.

Note: 

Due to higher temperature in the turbo mode, 

do not leave unattended the iron on garments to 

avoid any damage.

Note:

 When the appliance is switched on, it will 

always be set to the normal steam mode, 

independently on the last setting chosen.

•  For steam ironing

 press the steam button (11) 

below the iron handle. Steam will come out from 

all the holes in the soleplate. 

•  Double trigger:

 Press the steam button (11) or 

the precision shot button (13) twice in quick 

succession within 1 second. There will be a 

continuous steam emission for a few seconds. 

Press the steam button (11) or the precision shot 

button (13) once again to stop the function.

•  For dry ironing

 iron without pressing the steam 

button (11). Please note that after 10 minutes of 

dry ironing, the iron switches to the auto-off 

mode.

•  Vertical steam:

 The iron can also be used for 

steaming hanging clothes (B).

•  3D soleplate:

 The unique round shape of the 3D 

soleplate ensures best gliding results on difficult 

parts (e. g. buttons, pockets etc.)

(C) Precision shot

• 

Press the precision shot button (13) completely down.

• 

Steam will come out of the tip area of the 

soleplate only.

• 

To stop this function release the button (13).

• 

If you do not press it down completely, some 

steam may also come out from the rear steam 

holes in the soleplate.

10

DLB245628_5712811801_Use_Instruction_IS_7043_7044_7055_7056_INT.indb   10

31.03.16   11:23