Braun IS 5043 WH - Инструкция по эксплуатации - Страница 10

Low Water

• 

When the water level is low, the icon   is 

permanently on.

• 

The icons 

/ 

 turn off

• 

If you want to continue steam ironing, refill the 

tank of the steam station (A).

(B) Start ironing

• 

Place the iron on the iron rest (5) or on its heel 

rest (15), plug in the appliance and press the on/

off switch on the station (2). 

• 

After switching ON, the related icon in the display 

(1) is permanently on.  

• 

At the same time the icon 

 in the display (1) 

will start to flash until steam is ready. This steam 

setting is suitable for garments like cotton and 

linen. Note: when this icon is flashing, the steam 

function is deactivated. 

• 

Once the temperature has been reached, the 

icon 

 will stay permanently on.

• 

The iron will start to heat up: Whilst this is 

happening, the temperature control LED (12) on 

the iron (12) will flash.  

• 

Thanks to the ultimate 

iCare technology,

 the 

system has one temperature setting which is 

perfectly suitable for all garments.  

• 

Once the temperature setting is reached, the 

temperature control LED is permanently on.  

•  For steam ironing 

press the steam button (11) 

below the iron handle. Steam will come out from 

all the holes in the soleplate. 

•  For dry ironing

 just stop pressing the steam 

button (11) or precision shot button(13). Please 

note that after 10 minutes of dry ironing, the iron 

switches to the auto-off mode.  

•  Double trigger

: Press the steam button (11) or 

the precision shot button (13)  twice in quick 

succession within 1 second . There will be a 

continuous steam emission for a few 

seconds. Press the steam button (11) or the 

precision shot button (13) once again to stop the 

function.

•  Vertical steam

: The iron can also be used for 

steaming hanging clothes (B).

• 

The unique round shape of the 

eloxal 3D 

soleplate

 ensures best gliding results on difficult 

parts (e. g. buttons, pockets and tough wrinkles).  

Note:

When starting the ironing session or when you have

not used the steam function for some time, the 

steam still present in the supply hose will condense 

into water. This may cause some spluttering in the 

appliance and a few drops of water may come out 

from the soleplate.

ECO Function

• 

For ironing with lower steam press the ECO 

button (3) and the icon 

 lights up

• 

Lower steam is suggested for most delicate 

garments like silk, wool and synthetics.

• 

Note: the 2nd time the ironing system is switched 

on, it will be set to the last steam mode, which 

may be the ECO mode. To return to the normal 

steam function press the ECO button again.

(C) Precision shot

• 

Press the precision shot button (13) completely 

down to activate steam will come out of the tip 

area of the soleplate only.

• 

To stop this function just release the button (13).

• 

If you don‘t press it down completely, some 

steam may also come out from the rear steam 

holes in the soleplate. 

(D) Iron Auto-Off

When the iron is in the auto-off mode, the icon   is 

flashing and the temperature control LED (12) is off. 

The iron will turn off to reduce power consumption.

It is activated if, after 10 minutes:

• 

there has been no steam emission.

• 

the iconn   is activated and water tank is not 

refilled.

To turn the iron on again, the ON/OFF (2) button 

has to be pressed. Before starting ironing again wait 

until the temperature control LED (12) is 

continuously on.

After ironing

• 

Press the On/Off button to turn off the appliance (2).

• 

Unplug and let the appliance cool down before 

storing.

• 

Empty the water tank.

• 

For models with lock system, lock the iron.

9