Braun CareStyle Compact IS2043BL - Инструкция по эксплуатации - Страница 14

14

•

When ironing garments with imprints, 
applications or even more sensitive fabric parts 
(i.e. embroidery), turn them inside out and, if 
necessary, lay a cotton cloth between the iron and 
the fabric. This way you avoid damage and get the 
volume of fabric designs that are not to be ironed 
fl at.

•

In order to prevent new creases while ironing 
with steam make sure that the garment shows no 
residual moisture before going on ironing other 
parts of it. 

(C) Steam modes

 iCare 

The iCare mode is automatically chosen when the 
appliance is plugged in. The iCare mode indicator 
(11) is on. 
This mode is suggested for garments like wool, 
polyester and cotton/linen.

eco 

The eco mode is suggested for most delicate 
garments like synthetics, silk and blended fabrics 
for which you need less steam. This mode allows 
less power consumption.
To select the eco mode, press the mode button 
(12). The eco mode indicator (10) turns on. 

 turbo

The turbo mode is suggested for garments that 
need more powerful steam, like thick cotton/linen 
and jeans.
To select the turbo mode, hold down the mode 
button (12) until the eco mode indicator (10) and 
the iCare mode indicator (11) turn on. 

Double trigger (turbo mode only) 

Use the double trigger function to remove stubborn 
creases. 

Press the steam button (2) twice quickly. There will 
be a continuous steam emission for a few seconds. 
Press the steam button once again during steam 
emission to stop the function.

To repeat the steam boost wait about 12 
seconds before pressing again the steam button. 

Vertical steam (iCare mode only)

The iron can also be used for steaming hanging 
clothes for a quick refreshment. However, this 
function does not replace ironing.

Ensure the iCare mode is selected and hold the iron 
in a vertical position, tilted slightly forwards. 

Press repeatedly the steam button (2) while moving 
the iron from top to the bottom. Then place the iron 
on the iron rest. 

Steam is very hot:

 never iron or dampen garment 

while wearing them.

3D soleplate 

The unique round shape of the 3D soleplate 
ensures best gliding results on diffi

  cult parts (e. g. 

buttons, pockets etc.)

(D) Auto-off 

This function is activated if after 10 minutes there 
has been no steam emission.

•

When the appliance is in the auto-off  mode the 
temperature control LED (1) is fl ashing in a faster 
interval.

•

To turn the iron on again press the reset button 
(14), the mode button (12) or the steam button 
(2).

•

Before start ironing again wait until the 
temperature control LED is permanently on.

(E) Lock system / storage  

The appliance is equipped with a lock system for 
convenient transportation and easy storage. It 
is possible to lift and carry the appliance on the 
handle of the locked iron. 

NOTE: 

Before transportation make sure the iron is 

properly locked and has cooled down completely. In 
case you do not use the appliance for a longer time 
(more than 1 month), empty the water tank before 
storage.   

•

Place the iron on its heel rest (3) into the iron rest 
(4) on the base unit.

•

To lock the iron turn the locking knob (15) to  .

•

To unlock the iron turn the locking knob to  .  
The iron will be released.

Unplug and let the appliance cool down (the 
soleplate is hot) before winding the cords for 
storage.

(F) Anti-limescale fi lter cartridge  
replacement  

To maintain optimum performance of your 
appliance it is important to exchange regularly the 
anti-limescale fi lter cartridge  or use demineralised 
water.

When the anti-limescale fi lter cartridge  requires 
changing, the anti-limescale indicator (13) turns on. 

5712811981-01_CareStyle_1_INT_S6-152.indd   14

08.06.18   11:14