Tefal Tween Nano DV9001E0 - Инструкция по эксплуатации - Страница 6

2

EN

USE

During use or while unit is heating or cooling, do not rest appliance on its soleplate. 

Place the product on its iron rest support (- fig. 4B), on heat resistant , flat surface, as the 

soleplate will be hot. As the appliance heats, the housing becomes warm. This is normal.

•  Once the appliance is plugged in, the temperature ready light is on. Set the thermostat control 

dial to the desired setting 

- fig.4a

.

•  After the light turns off, you can begin use as the appliance has reached the appropriate 

temperature.

•  To begin steaming, press the steam button with the appliance facing away from you, holding 

it in a vertical position 

- fig.7

. 

The soleplate of the appliance will smooth out tough wrinkles from clothes and press in sharp 

creases and pleats.

1. Starting Up

When the appliance is plugged in the soleplate heats.

Do not touch or remove the fabric brush accessory without letting the soleplate cool 

down.

•  Plug in the appliance, place it on the iron rest support and wait approximately 45 seconds for 

it to reach full temperature before using. The temperature light will turn off.

2. Selecting the temperature

Set the temperature control dial according to the type of fabric you are ironing. Check the fabric 

label of your clothes for the appropriate setting.

Fabric

temperature regulator

Synthetics

nylon

polyester

•

(low temperature)

Silk

wool

••

(medium temperature)

cotton

linen

•••

(high temperature)

Start at low temperature 

•

 and graduate to high temperature 

•••

. For delicate fabrics we 

recommend carrying out a test on a non-visible part of the garment (inner seam). Steam can 
only be produced when the thermostat is aligned to 

•••

 setting or more. 

As appliance is very hot: never attempt to remove creases from a garment while it is 

being worn. (fig. 9)