Отпариватели Tefal DT3030 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
There is no steam.
The appliance is not plugged in,
or not switched on.
Check that your appliance is correctly plugged
in and switched on.
The water level is too low.
Unplug your appliance and refill it.
The steam pump has not been
primed.
Press the steam trigger continuously for a few
seconds to begin steaming.
You are using the appliance for
the first time.
Press the steam trigger continuously for a few
seconds to begin steaming.
The water tank is not fully in
place.
Ensure that stopper is closed and that the water
tank snaps when put into place.
The appliance does not
heat up.
It is not plugged in, or not
switched on.
Plug in your appliance and switch on.
The appliance is on standby
mode. *
Start again the appliance by activating the ON/
OFF button.
Water tank leaks.
The water tank is not fully in
place or the stopper is not closed
properly. *
Ensure that stopper is closed and that the water
tank snaps when put into place. *
Steam rate decreases or
reject particles.
Calc Sealing
Refer to ‘ANTI CALC’ section in instructions
for use.
The steam leaves stains on
the fabric or the appliance
spits.
You are not using the correct
water.
Use only water according to IFU and no
additive inside.
The appliance has not been
rinsed enough after the
descaling operation.
Read carefully the ‘ANTI CALC’ section in
instructions for use.
You are using other liquids than
white vinegar to descale the
product.
Use only white vinegar during ‘ANTI CALC’
procedure.
Appliance steams
continuously.
The steam trigger is on the lock
position.
Unlock the steam trigger. *
Water leaks from steam
head.
The appliance is in a tilted
position.
Gently comeback in a vertical position.
Our product is not hot enough.
Wait for your appliance to be hot enough
before use.
* depending on model, check IFU of your appliance
Problems with your appliance?
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
