RUNZEL PRO-300 - Инструкция по эксплуатации - Страница 11

Page 11 of 36

Runzel PRO-300   RLC Grupp 2018

 (ENG)

Safety devices function 

This product adopts the two security protection device, 

users safer and more confident

Thermostats:  in  fever,  the  thermostat  control  the 

fever  in  the  minimum  temperature  between  work  and 

effectively prevent the high risks caused by

Hot  melt  implement  when  a  thermostat  which  causes 

fever, the temperature rose to a temperature, thermal 

melt  implement  will  be  timely  melt  in  time,  to  cut  off 

the automatic protection to prevent danger.

Installation before use 

•  Pleas read the instruction carefully. 

•  Remove all the package. 

•  Do not power on or open before finish the install. 

•  Appliance knock down assembly picture, Fig. 1

•  Put the telescopic pole insert the base. Fig. 2

•  Make sure the knob tight after insert the body. Fig. 3.

•  Pull the little telescopic pole, knob 90 degree, telescopic 

open. Fig.4.

•  Open the telescopic buckle, pull the Aluminum pole. 

Fig . 5.

•  Keep the buckle tight. Fig.6

•  Put the steam brush on the brush fix base.Fig.7

 Water tank with water

•  Will  hang  on  a  machine  on  the  flat  ground  and  took 

out  the  army  opened  the  cover,  fasten  the  lid  with 

clockwise. as in fig. 8 

•  To  the  case  with  water,  water  from  the  army  covered 

with water.  (as in figure 9 if you water it is very high 

degrees  of  hardness  of  water  resources  management 

consult,  if  possible  please  use  the  following  of  the 

mixed  distillation  water  or  soften:  50%  of  the  water 

with fountain 50% distillation water or soften or drink 

water is pure water.

•  It  up  with  water  after  the  army,  with  a  clean  towel  to 

clean the toilet outside the water tank on the well-being 

of will. (in figs 10 and 11)

•  Do not fill hot water.

 Iron instruction

•  Fill the water from the water filled cover, open the cover 

of water tank, fill the water into water tank. Fig. 12, 

1

2

3