RUNZEL PRO-290 - Инструкция по эксплуатации - Страница 11

Page 11 of 36

Runzel

 PRO-290  

© R

LC

 Grupp 2018 (ENG)

Safety devices function 

This product adopts the two security protection device, 

users safer and more confident

Thermostats:  in  fever,  the  thermostat  control  the 

fever  in  the  minimum  temperature  between  work  and 

effectively prevent the high risks caused by

Hot  melt  implement  when  a  thermostat  which  causes 

fever, the temperature rose to a temperature, thermal 

melt  implement  will  be  timely  melt  in  time,  to  cut  off 

the automatic protection to prevent danger.

Installation before use 

•  Pleas read the instruction carefully. 

•  Remove all the package. 

•  Do not power on or open before finish the install. 

•  Appliance knock down assembly picture

•  Put the telescopic pole insert the base. 

•  Make sure the knob tight after insert the body.

•  Pull the little telescopic pole, knob 90 degree, telescopic 

open. 

•  Open the telescopic buckle, pull the Aluminum pole. 

•  Keep the buckle tight. 

•  Put the steam brush on the brush fix base.

 Water tank with water

•  Will  hang  on  a  machine  on  the  flat  ground  and  took 

out  the  army  opened  the  cover,  fasten  the  lid  with 

clockwise. as in fig. 

•  To  the  case  with  water,  water  from  the  army  covered 

with  water.    (as  in  figure  if  you  water  it  is  very  high 

degrees  of  hardness  of  water  resources  management 

consult,  if  possible  please  use  the  following  of  the 

mixed  distillation  water  or  soften:  50%  of  the  water 

with fountain 50% distillation water or soften or drink 

water is pure water.

•  It  up  with  water  after  the  army,  with  a  clean  towel  to 

clean the toilet outside the water tank on the well-being 

of will. (in figs)

•  Do not fill hot water.

 Iron instruction

•  Fill the water from the water filled cover, open the cover 

of water tank, fill the water into water tank.