Makita HM0871C - Инструкция по эксплуатации - Страница 5

5 

exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH101-13 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine:   

Demolition Hammer

Model No./ Type: HM0871C, HM0870C 
are of series production and 

Conforms to the following European Directives: 

98/37/EC until 28th December 2009 and then with 
2006/42/EC from 29th December 2009 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd, 
Michigan, Drive, Tongwell, 
Milton Keynes, MK15 8JD, England 
 

24th April  2009

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, JAPAN 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and instructions for 
future reference. 

GEB004-6 

HAMMER SAFETY WARNINGS 

1. 

Wear ear protectors.

 Exposure to noise can 

cause hearing loss. 

2. 

Use auxiliary handle(s), if supplied with the 
tool.

 Loss of control can cause personal injury. 

3. 

Hold power tool by insulated gripping 
surfaces, when performing an operation 
where the cutting accessory may contact 
hidden wiring or its own cord.

 Cutting 

accessory contacting a "live" wire may make 
exposed metal parts of the power tool "live" and 
could give the operator an electric shock. 

4. 

Wear a hard hat (safety helmet), safety glasses 
and/or face shield. Ordinary eye or sun 
glasses are NOT safety glasses. It is also 
highly recommended that you wear a dust 
mask and thickly padded gloves. 

5. 

Be sure the bit is secured in place before 
operation. 

6. 

Under normal operation, the tool is designed 
to produce vibration. The screws can come 
loose easily, causing a breakdown or accident. 
Check tightness of screws carefully before 
operation. 

7. 

In cold weather or when the tool has not been 
used for a long time, let the tool warm up for a 
while by operating it under no load. This will 
loosen up the lubrication. Without proper 
warm-up, hammering operation is difficult. 

8. 

Always be sure you have a firm footing. 
Be sure no one is below when using the tool in 
high locations. 

9. 

Hold the tool firmly with both hands. 

10. 

Keep hands away from moving parts. 

11. 

Do not leave the tool running. Operate the tool 
only when hand-held. 

12. 

Do not point the tool at any one in the area 
when operating. The bit could fly out and 
injure someone seriously. 

13. 

Do not touch the bit or parts close to the bit 
immediately after operation; they may be 
extremely hot and could burn your skin. 

14. 

Do not operate the tool at no-load 
unnecessarily. 

15. 

Some material contains chemicals which may 
be toxic. Take caution to prevent dust 
inhalation and skin contact. Follow material 
supplier safety data. 

SAVE THESE INSTRUCTIONS. 

WARNING: 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to safety rules for the subject product. 
MISUSE or failure to follow the safety rules stated in 
this instruction manual may cause serious personal 
injury.