Stadler Form V-007 Viktor - Инструкция по эксплуатации - Страница 7

• Do not place the appliance near a heat source. Do not subject the power 

cord to direct heat (such as a heated hotplate, open flames, hot iron sole 
plates or heaters for example). Protect power cords from oil.

• See to it that the appliance is properly positioned to ensure a high stabil-

ity during its operation and make sure that no one can trip over the power 
cord.

• The appliance is not splash-proof.

• For indoor use only.

• Do not store the appliance outdoors.

• Store the appliance in a dry place inaccessible to children (pack the ap-

pliance).

• If the power cord is damaged, it must be replaced by the manufacturer 

or a repair shop authorized by the manufacturer or by similarly qualified 
persons in order to avoid a hazard.

• HPP-Filter: Failure to comply with the prescribed cleaning interval of 2 

months results in a fire hazard!

• Prior to any maintenance work and after each use, switch off the appli-

ance and withdraw the adapter from the socket.

Functional overview
Preliminary filter 

The preliminary filter removes large dust particles and 

pollutants from the air, thereby protecting the secondary filter from severe 
soiling and optimising its functionality. The preliminary filter must be vacu-
um-cleaned regularly, 1–2 x per month depending on how dirty it is. Because 
the filter material becomes worn out in the course of time, the preliminary 
filter must be replaced after 6 months.

HPP™ Filter System 

The HPP™ filter is the heart of the air purifier. It 

filters out viruses, bacteria, fine dust, pollen, dust mite excretions and mould 
from the room air. Its high efficiency is ensured by the use of extremely 
powerful magnetic fields. The HPP LED (8) shows the function status of the 
HPP filter:

• LED is illuminated – HPP filter is installed and working faultlessly

• LED is not illuminated – HPP filter is not installed or does not work

• LED is diminished – HPP filter is dirty, clean according to the instructions.
The HPP filter must be cleaned every 2 months under cold running water 
using detergent (see chapter “Cleaning”).

Activated carbon filter 

The activated carbon filter is able to adsorb air-

borne gases (unpleasant odours or tobacco smoke) thereby filtering them 
out of the air. Its capacity is finite, therefore the activated carbon filter must 
be replaced every 6 months depending on the level of air contamination 
caused by unpleasant odours and tabacco smoke. Should it become appar-
ent, even before the end of the 6 month period, that the unpleasant odours 
are no longer being adequately eliminated, this is an indication that the filter 
must be replaced.

Fragrance dispenser 

The fragrance dispenser fleece may be moistened 

with a few drops of fragrance (max. 1–2 drops). Viktor will then give off 
the fragrance into the room air, generating a comfortable ambiance. Please 
note: if used in excess, fragrances may affect and damage the plastic mate-
rial. Therefore, please add no more than 1–2 drops to the fleece, and do not 
add any more until the first fragrance is used up. If in doubt, please wash out 
and dry the fragrance dispenser and fleece.

Speed levels 

The air purifier has 5 different speed levels for different ap-

plications:
Level 1  very quiet – e.g. for bedrooms overnight
Level 2  quiet – for bedrooms or smaller rooms
Level 3   for continuous daytime use in smaller rooms (25 m

2

)

Level 4   for continuous daytime use in larger rooms 
  

(up to 50 m

2

), e.g. open-plan kitchen/living room

Level 5  high-speed – for quick air purification or 
  

purification of heavily polluted air

Timer 

The appliance switches off automatically after 2, 4 or 8 hours as you 

wish. Ideal for air purification when you leave the home but would like to 
have the air purified in your absence. The appliance can also be used with-
out the timer and is suitable for continuous operation.

Night mode 

Today, many appliances incorporate LED lights which are un-

suitable for night-time use in a bedroom. In night mode, the light intensity is 
reduced to a pleasant level.

Setting up / operation

1. Place Viktor on a flat surface in the desired area. Plug the adapter (3) into 

a suitable electric socket.

2. Open the appliance on the back side (by pressing on the labelling «Push to 

open»). Remove the protective membrane from the activated carbon filter 
(13). Please check whether the locking elements of the HPP™ filter (14) 
are in a horizontal position (as shown in the figure). If this is not the case, 
please move them until the locking elements are in a horizontal position 
to secure the HPP™ filter.

3. Then switch on the appliance by pressing the on/off switch (5).
4. You can adjust the speed and thus the purification rate (volume per hour) 

by pressing the speed level selector switch (6) (one blue lamp for level 1, 
two blue lamps for level 2, etc.).

5. You can use the timer to set the desired cleaning time. To do this, press 

on the timer button (7). You can choose between the following periods: 2 
hours, 4 hours or 8 hours. If you do not wish to use the timer, you may run 
the air purifier in continuous operation (no LED lamps illuminated).

6. If you find the lamps too bright (in a bedroom for example), you may reduce 

the light intensity by pressing the night mode key (9). You can choose 
between three different modes:
• Normal mode (default mode)
• Dimmed mode (push once)
• Lights-out mode (push twice)
• By pushing the dimmer button once more, you can go back into normal  
 mode.

7. You may use the Viktor air purifier to distribute fragrances in the room. 

Please be as economical as possible in the use of fragrances, because ex-
cessive quantities may lead to malfunctions and damage to the appliance. 
To use fragrances, remove the fragrance container (10) from its mounting. 
Place no more than 1–2 drops of fragrance in the container and replace 
it in its designated position. If you wish to change the fragrance, you can 
wash out the fragrance container and fleece under running water.