Philips AC4080/10 - Инструкция по эксплуатации - Страница 14

12

EN

Clean the pre-filter 
and descale the 
humidification filter

Filter alert light 
status

Follow this

Filter light   /   goes 
on

Clean the 
pre-filter and 
descale the 
humidification 
filter

Note

• 

Only the pre-filter and humidification 
filter are washable. Filter 2 is not 
washable.

• 

Filter light   /   goes on approximately 
once every month (fig 



).

1 

Wash the pre-filter under a running 
tap. If the pre-filter is very dirty, use 
a soft brush to brush away the dust 
(fig 

‚

).

2 

Air dry the pre-filter.

Note

• 

Make sure that the pre-filter is 
completely dry. If it is still wet, bacteria 
may multiply in it and shorten the 
lifetime of the pre-filter.

3 

Mix the white vinegar with an equal 
amount of tap water in a container 
that is large enough to soak the 
humidification filter in.

Note

• 

White vinegar has 5% acetic acid.

• 

If there are white deposits (limescale) on 
the filter, make sure that the side with 
the white deposits is immersed in the 
water.

4 

Let the humidification filter soak in 
the solution for one hour (fig 

ƒ

).

5 

Discard the water-vinegar solution.

6 

Rinse the humidification filter 
under the tap to rinse away vinegar 
residues. During rinsing, turn the 
humidification filter so that both 
the front and back sides are rinsed 
(fig 

~

).

7 

Let excess water drip off the 
humidification filter and let it air dry.

8 

After the pre-filter and 
humidification filter are put back 
in the appliance, reset the filter 
lifetime counter. (Refer to chapter 
7 "Resetting the filter lifetime 
counter")