Black+Decker BXAP350E - Инструкция по эксплуатации - Страница 6

ENGLISH

(Original instructions)

6

♦ The plug must be easily accessible so it can be discon-

nected in an emergency.

INSTRUCTIONS FOR USE 

Before use:

♦ Remove the appliance’s protective film.

♦ Make sure that all the product’s packaging has been 

removed. 

♦ To eliminate the smell given off by the appliance when 

used for the first time, it is recommended to have it on at 

full power for 2 hours in a well-ventilated room.

♦ Prepare the appliance according to the function you wish 

to use:

INSTALLING THE PRODUCT

♦ Pull the rear cover handle to remove it (FIG1)

♦ Remove the plastic package from the filter.(FIG2)

♦ Install the filter into the machine (FIG3)

♦ Fasten up the rear cover and connect to the power 

source (FIG4)

USE:

♦ The appliance can be used directly connected to the 

main.

♦ Extend the cable completely before plugging it in.

♦ Attach the appliance to its base / connector making sure 

that it is correctly fitted into place. 

♦ Connect the appliance to the mains.

♦ Guide the appliance to direct the flow of air in the desired 

direction. 

♦ Turn the appliance on, by using the on/off button.

♦ Select the appliance function desired.

♦ Select the desired speed.

Timer function:

♦ The appliance’s operating time can be controlled.

♦ Press and hold button (6)  for 5 seconds to activate 

the Timer. The time will be displayed on the screen 

and switch between 1h/2h/4h/8h/0(cancel timing), the 

required time is set when stop pressing

FAN SPEED MODE

Cycles through fan speeds:

AUTO MODE

♦ Auto Mode uses the sensor inside the air purifier to 

adjust the fan speed automatically based on air quality.

♦ For example, if the air quality is bad, the fan will auto-

matically be set to highspeed.

SLEEP BUTTON

♦ Tap this button (1), to turn Sleep Mode on/off.

♦ Sleep Mode operates quietly by using the lowest 

possible fan speed, all indicators except sleep indicator 

will be off.

♦ Tapping any key, the display will resume for 30 seconds, 

and then tap sleep button or fan button within 30 sec-

onds to exit sleep mode and enter the auto mode.

♦ After 30 seconds without button operation, the display 

will be off.

Lock/UV-C button

♦ The UV-C button is combined with child lock button.

♦ Tap this button to turn the UV-C on/off. When the UV-C 

is turned on, the status indicator lights up, otherwise it 

turns off.

♦ For the safety use of UV, when the filter cover is opened, 

the UV-C LED will shut off automatically and the 

appliance stops working as well. Please always use the 

appliance with the filter inside.

♦ Press and hold this button for 5 seconds to activate the 

child lock function, and the indicator is displayed on the 

lower right corner of the screen.

FILTER REPLACEMENT

♦ When the filter life expires (about 3000 hours of life time) 

the filter replacement indicator will blink red to remind 

you.

Follow “installing the product” instructions 

♦ After change the new filter, press and hold for 5 seconds 

to reset.

Once you have finished using the appli

-

ance:.

♦ Select the minimum position (MIN) using the speed 

control.

♦ Turn the appliance off, using the on/off button.

♦ Unplug the appliance from the mains.

♦ Clean the appliance.

Safety thermal protector:

♦ The appliance has a safety device, which protects the