BEURER LR 200 - Инструкция по эксплуатации - Страница 17

17

Note

 When starting up for the first time, all of the LEDs initially light up. The air cleaner is then set to the lowest 

fan speed and the ioniser is activated.

Note

If the “Filter reset” light above the on/off button is flashing, you must replace the combi filter. To do this, 

follow the instructions in the “Filter change” section.

6.2 Fan speed 

The air cleaner has three fan speeds: I (low), II (medium) and III (high).
• To switch between the individual fan speeds, press the fan speed button 

. The fan speed that is currently 

set lights up on the control panel.

6.3 Ioniser/Sleep mode 

Ioniser

Sleep mode

Note

1 x press

ON

OFF

„ION“ LED illuminates

2 x press

ON

ON

„ION“ LED illuminates

„Sleep“ LED flashes

3 x press

OFF

ON

„ION“ LED goes out

„Sleep“ LED flashes

4 x press

OFF

OFF

„Sleep“ LED goes out

If sleep mode is activated, all the LEDs in the operating panel automatically switch off after 10 seconds.

To deactivate sleep mode, press any button on the operating panel.

6.4 Timer function 

The air cleaner features a timer function that you can use to determine the number of hours the air cleaner 

should run for before it automatically switches itself off. The air cleaner has three timer periods: 2H (two hours), 

4H (four hours) and 8H (eight hours). 

• To switch between the individual timer periods, press the TIMER button (

) The TIMER period that is 

currently set lights up on the control panel. The air cleaner will now automatically switch off after the set 

number of hours has passed.

• To switch off the timer, repeatedly press the TIMER button (

), until the light above the TIMER button goes 

out. The air cleaner will now clean for an unlimited period.