Обогреватели VITEK 2174 W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
ENGLISH
•
To switch the unit off, set the temperature control
knob (4) to the “
MIN
” position, set the switch (5)
to the “
0
” position and then unplug the unit.
Notes:
–
While the first switching on the heating ele-
ment burns, therefore occurrence of a small
amount of smoke or foreign smell is possible.
It is normal.
–
Do not open windows and doors when the unit
is operating; otherwise you will not get the
desired results, due to cold air inflow.
Automatic emergency switch-off functions
The unit is equipped with auto switch-off function
in case of overheating or if it is dropped.
•
If the unit starts overheating, the automatic
thermal switch will be on.
•
In this case immediately set the switch (5) to
the “
0
” position (the unit is switched off).
•
Remove the power plug from the mains
socket.
•
Make sure that the openings on the body are
not blocked and nothing prevents free air flow.
•
Let the unit cool down for approximately
20 minutes before switching it on again.
•
Plug the unit in, switch it on using the switch
(5), set the heating temperature by turning the
temperature control knob (4).
•
The unit is also equipped with an automatic
switch that switches the unit off when it is
dropped or considerably tilted. When the
unit is back in the vertical position, it will be
switched on.
•
If the unit is not switched on, it may mean that
there are other damages in the convection
fan-heater. In this case contact an authorized
service center to repair the unit.
CLEANING AND CARE
•
Before cleaning disconnect the unit from the
mains and let it cool down.
•
Clean the unit regularly to avoid dust accu-
mulation.
•
Wipe the outer surface of the unit with a
damp cloth. Do not use abrasive substances
to remove dirt.
•
Do not immerse the convection fan heater in
water or any other liquids. Provide that water
does not get into the unit body to avoid elec-
tric shock.
•
To clean the grids of the unit, use a vacuum
cleaner with a corresponding attachment.
•
Keep the convection fan-heater away from
children in a dry cool place.
DELIVERY SET
1.
Convection fan-heater – 1 pc.
2.
Support plates with wheels – 2 pcs.
3.
Screws for plates fastening – 8 pcs.
4.
Dowels for wall mounting – 2 pcs.
5.
Screws for wall mounting – 2 pcs.
6.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
СONVECTION FAN-HEATER VT-2171 W
Power consumption: 1000 W
Heating area: 15 sq m
СONVECTION FAN-HEATER VT-2172 W
Power consumption: 1500 W
Heating area: 20 sq m
СONVECTION FAN-HEATER VT-2174 W
Power consumption: 2000 W
Heating area: 25 sq m
The manufacturer reserves the right to change
specifications of the unit without a preliminary
notification
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
IM VT-2171.indd 5
23.06.2016 14:23:12
