Vitek 2130 BK - Инструкция по эксплуатации - Страница 6

Do not use the fan heater outdoors

• 

.

This fan heater is not intended for use in 

• 

bathrooms or in places with higher mois-
ture.

Do not place the fan heater in places, where 

• 

it can fall in a bath or other container filled 
with water

.

If some water gets on the fan heater, before 

• 

touching it you should unplug it in order to 
avoid risk of getting electric shock.

Do not cover the cord with mats, carpet 

• 

strips etc. The cord should be situated away 
from walking route and do not place any ob-
jects on it. 

Do not pour soda water or perfume addi-

• 

tives into the water tank.
Do not block steam outlets and provide that 

• 

foreign objects do not get inside them.
Do not insert any object into gratings of the 

• 

fan heater in order to avoid electrical shock, 
fire or damage of the unit

.

Make sure that air inlets and outlets are not 

• 

blocked during operation. Do not place the 
fan heater on soft surfaces, for instance, 
bed in order to avoid blockage of air open-
ings and fire. 

Always unplug the unit and pour out water 

• 

from the water tank during cleaning the unit, 
if you do not use it. If you want to move the 
unit to another place, unplug the unit first.

Do not use the fan heater in places near pet-

• 

rol, paints or inflammable liquids storage.   
Do not leave the fan heater operating while 

• 

sleeping.

Always switch off and unplug the fan heater 

• 

if it is not being used.
The fan heater is intended only for house-

• 

hold use

.

OPERATION

Insert the plug (12) into the electrical socket

, 

and set the button (7) to the “

I” position.  

The 

light indicator (28) will light up and sound signal 
will be heard. 

Using the buttons on the control panel:

Press the ON/OFF button (19), sound signal 

• 

will be heard and 

fan mode indicator (29) will 

light up, room temperature indicator (21) will 
be displayed. 
To select low power, press the (15) button, 

• 

the indicators (23) and (30) will light up

; to 

select maximal heating power, press the 
(16) button, the indicators (24) and (30) will 
light up.

Note

-  

Use low power for small rooms heating, and 

max. power for large rooms heating.
Set the required temperature for heating by 

• 

pressing the (13) “- “or “+” buttons, the indi-
cator (22) will light up

Note

-  When room temperature exceeds the preset 

temperature by 

2°, the fan heater will switch 

off.

-   The fan heater will switch on again when 

temperature decreases by 1° lower than the 
preset temperature.

You can set temperature from 

• 

4

°C

 (39

°F)

 to 

32

°C

 (90

°F)

, setting step is 1°С. 

Note

-   In this unit possibility to change tempera-

ture indication is intended from Celsius (°С) 
to Fahrenheit (

°F). Press and hold the (13) 

buttons “-“and “+” more than 3 seconds.

To switch on humidifying function press the 

• 

(20) button, the indicator (25) will light up.

Note

-   If the water tank is not full, when you press 

the (20) button the indicator (27) will light 
up, it means that the water tank is empty.
Switching on the fan heater rotation mode 

• 

during heating the room is performed with 
the (18) button, to switch off the rotation 
press the (18) button again.
Timer time selection is performed with the 

• 

(17) button, the reset time will be displayed. 
You can set operation time from 1 till 8 hours 
(1h, 2h, 4h, 8h).
To switch off the fan heater press the (19) 

• 

button, set the (7) button to the “0” position, 
and then unplug the unit.

5

              ENGLISH         

2130 Instr.indd   5

2130 Instr.indd   5

18.07.2011   10:21:10

18.07.2011   10:21:10