Timberk TOR 21.1005 BC - Инструкция по эксплуатации - Страница 6

www.timberk.com • electric oil filled radiator

6

IMPORTANT! 

For the unit to operate normally, the level of voltage in 

electric mains must be sufficient in strict compliance 

with the technical parameters indicated on the unit. 

Carefully study the technical label, as well as all labels 

with special warnings, attached to the unit’s surface.

1. Remember that you must clean the unit regularly to remove dust from 

the surface of heating sections. Dust and dirt on the unit’s surface have 

a negative effect on the unit’s operational efficiency, in some cases a 

smell of burning dust can cause a headache and nausea, as well as other 

negative health effects. Also a dirty unit cannot operate 100% effectively, 

temperature parameters of the room heating can be disrupted.
2. Prior to preventive cleaning of the unit, you must switch off the unit, 

unplug it from electric mains (see «Important precautions») and let the unit 

cool down.
3. Clean the unit’s sections and other surfaces with a soft, slightly damp 

duster/cloth. The cloth must not leave fluff on the unit’s surface.
4. It is not recommended to use detergents, including materials containing 

abrasive elements.
5. During cleaning, please, do not damage the unit’s surface by sharp 

objects (hard sponge, polishing paper, etc). Scratches on the painted 

surface can result in rusting.
Switch on and use the unit again only having carried out all «Important 

precautions»; also make sure that the unit’s surface is absolutely dry.

8. CLEANING AND MAINTENANCE OF THE UNIT

Possible malfunctions and remedies for them:

10.  TROUBLESHOOTING

Malfunction

Cause

Remedy

1. The heater heats poorly

1. The heating element is faulty

1. Contact the authorized service center 

of Timberk

2. Low voltage in the electric mains

2. Check voltage in the electric mains

2. The heater does not work

1. No voltage in the electric mains

1. Check presence of voltage in the 

electric mains

2. Breakdown of the electric cable

2. Check integrity of the electric cable and 

replace it if necessary

3. The automatic circuit breaker of the 

electric mains is faulty

3. Check operability of the automatic circuit 

breaker of the electric mains and replace 
the faulty circuit breaker if necessary

4. Breakdown in the heating element circuit

4. Contact the authorized service center 

of Timberk

After end of life the fan heater should be utilized in accordance with the 

norms, regulations and procedures effective in the place of utilization. For 

more detailed information please contact representatives of local authorities.  

9. UTILIZATION

11. TRANSPORTATIOM AND STORAGE

Temperature 

requirements*
Humidity 

requirements*

We are exploring new technologies and we constantly improving the quality 

of our products. That’s why specifications, design and accessories are 

subject to change without any specific notice.

Transportation and 

storage

From -30° to +50°

From 15% to 85% 

(without a condensate)

* This product must have storage in dry, well-ventilated space of warehouse at the temperature 
not lower than -30°

If you are not able to remedy a malfunction according to the 

recommendations or other malfunctions occur, contact the authorized 

service center of  Timberk.