Timberk TFH T15NTX.B - Инструкция по эксплуатации - Страница 5

www.timberk.com • Electric metal ceramic fan heater

5

7. CONTROL OF THE FAN HEATER

Unit operation

1. Plug the power cord.
2. Select the heating mode, comfortable for you, by setting the heating 

power regulator to one of the indicated positions.
3. Set the control switch to maximum (II) for fast warm up of a room. 

Once the room is comfortable, select a lower setting to reduce electrical 

consumption and to prevent the room from becoming too warm. When the 

room temperature will reach the desired level, turn the regulator in position 

«off». To activate ventilation without heat, turn the switch to position «0». The 

heater will start to work in the mode of ventilation.

Models

TFH T15NTX/TFH T15NTX.B

Switched off

Cold air

~ 1000 W

~ 1500 W

NOTE:

Apperance of smell/smoke is possible at first use. Do 

not care, this means that an oll drop got oto the glowing 

spiral during manufacturing. The drop will quickly 

evanorate and no smoke/ smell will appear anymore.

9. DISPOSAL

Upon completion of service life, the fan heater must be disposed in 

compliance with regulations, rules and by means, currently in force at a 

disposal station. Such information on disposal of the fan heater you can 

obtain from a representative of local authorities.

Fig. 2

Prior to cleaning and maintenance make sure that:

• 

the pover mode selector is set to «0» position (OFF) and the unit is de-

energized;

• 

disconnect the unit from electric mains by unpplugging the power cord 

from an electric outlet;

8. MAINTENANCE

Models TFH T15NTX, TFH T15NTX.B

10. CIRCUIT DIAGRAMS

Recomendations on regular cleaning:

• 

disconnect the unit from electric mains;

• 

let the unit cool down, then wipe its case wiht a sof, slighly damp cloth.

It is not rrecomended to use detergents for washing, including materials 

with abrasive elements.
Prevent damaging the unit by sharp objects (for example, by polishing 

paper, etc.).

thermal

cut off

fuse

LOW

HIGH

PCB

Motor

Power
Switch