Timberk TCH AB8 800 - Инструкция по эксплуатации - Страница 6

www.timberk.com • electric ceiling heater

6

1.  Before switching the heater, it is necessary to thoroughly wipe the 

surface of the radiating boards first with a soft rag moistened in alcohol 

and then with a dry rag in order to exclude appearance of burnt spots.
2. After switching and reaching the working mode, the appliance starts to 

radiate infrared beams and heat the surrounding objects/bodies.
3. To exclude unpleasant burnt odor, it is recommended to keep the heater 

clean preventing accumulation of dust on it.
4.Within a few minutes after turning the heater on, the heating element 

may have black dots. This is normal and does not affect the operation of 

the device.
5. It is not recommended to look at the heating element for a long time it 

can cause visual impairment.

Possible malfunctions and remedies for them:

1. During operation, it is necessary to periodically (once a year) check the 

electric cable contacts and terminal connectors for good tightening.
2. If the body becomes dirty, wipe off dust with a towelette. Radiating 

boards should be wiped in cold condition with alcohol.

7. OPERATION

10.  TROUBLESHOOTING

8. MAINTENANCE

NOTE:

Discoloration of paint on the heater body wall directed 

to the ceiling during operation is not a defect. Changing 

of colour for heating plates is not defect.

NOTE:

Radiating boards should be wiped with a soft rag 

moistened in alcohol leaving no scratches on the 

surface. Use of other liquids is prohibited!

WARNING! 

Slight crackles may be heard during operation at the 

moment of heating or cooling, which disappear, when 

the heater reaches the working mode which is not a 

malfunction.

Malfunction

Cause

Remedy

1. The heater heats 
poorly

1. The heating element is faulty

1. Contact the authorized service center of 

Timberk

2. Low voltage in the electric mains

2. Check voltage in the electric mains

2. The heater does 
not work

1. No voltage in the electric mains

1. Check presence of voltage in the electric mains

2. Breakdown of the electric cable

2. Check integrity of the electric cable and replace 

it if necessary

3. The automatic circuit breaker of the 

electric mains is faulty

3. Check operability of the automatic circuit 

breaker of the electric mains and replace the 
faulty circuit breaker if necessary

4. Breakdown in the heating element circuit

4. Contact the authorized service center of 

Timberk

9. TRANSPORTATION AND STORAGE

1. The device in the manufacturer’s packaging can be transported to any 

distance by all types of closed transport at temperatures from -50 °С to +50 

°C and relative humidity up to 80 % (at air temperature +25 °C) in accordance 

with the transportation rules goods operating on this type of transport. 

2. When transporting, any impact and movement of the package inside the 

vehicle is unacceptable.

3. The packed device should be stored in covered ventilated rooms at an 

air temperature of -10 °C to +50 °C at a relative humidity of up to 80 % (at 

air temperature +25 °C). The room should not have aggressive impurities 

causing corrosion. 

4. When transporting and storing, strict adherence to manipulation marks 

on the packaging device.