Timberk TCH A3 2000 - Инструкция по эксплуатации - Страница 8

www.timberk.com • electric ceiling heater

7

Possible malfunctions and remedies for them:

If you are not able to remedy a malfunction according to the recommendations 

or other malfunctions occur, contact the authorized service center of  Timberk.

10.  TROUBLESHOOTING

NOTE:

Radiating boards should be wiped with a soft rag 

moistened in alcohol leaving no scratches on the 

surface. Use of other liquids is prohibited!

Malfunction

Cause

Remedy

1. The heater heats poorly

1. The heating element is faulty

1. Contact the authorized service center 

of Timberk

2. Low voltage in the electric mains

2. Check voltage in the electric mains

2. The heater does not work

1. No voltage in the electric mains

1. Check presence of voltage in the 

electric mains

2. Breakdown of the electric cable

2. Check integrity of the electric cable and 

replace it if necessary

3. The automatic circuit breaker of the 

electric mains is faulty

3. Check operability of the automatic circuit 

breaker of the electric mains and replace 
the faulty circuit breaker if necessary

4. Breakdown in the heating element circuit

4. Contact the authorized service center 

of Timberk

9. TRANSPORTATIOM AND STORAGE

Temperature 

requirements*
Humidity 

requirements*

We are exploring new technologies and we constantly improving the quality 

of our products. That’s why specifications, design and accessories are 

subject to change without any specific notice.

Transportation and 

storage

From -30° to +50°

From 15% to 85% 

(without a condensate)

11. WIRING SCHEMATIC DIAGRAM

12. DISPOSAL

Fig.4

Upon completion of the service life, the infrared heater should be disposed 

according to the effective local regulations, rules, and methods. For more 

details on disposal of the infrared heater, please contact a representative 

of the local authority.

~220 V