Обогреватели Timberk T-IR1000-D10HU - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
15
2. Install the device on flat and dry surface, take out the stand from the rear part of the
device. Connect the power plug to the outlet
3. Using the control knob select the desired heating mode: low power (1), medium power
(2), High power (3)
4. To turn off the device turn the control knob to 0 position and unplug the device
9. MAINTANANCE
Before cleaning make sure that control panel is on “0” position and device is unplugged
Recommendations for regular cleaning:
Take out the plug from the socket, let the device cool down, wipe is body with soft,
slightly damp cloth
It is not recommended to use detergents, incl. abrasive products
Do not damage the device with sharp objects
10. TROUBLESHOOTING
Possible malfunctions and methods of removal are given in Table 2.
If you are not able to remedy a malfunction according to the recommendations or other
malfunctions occur, contact the authorized service center.
Table 2
Malfunction
Possible causes
Removal
The heater heats poorly
The heating element is faulty
Contact the authorized
service center
Low voltage in the electric
mains
Check voltage in the electric
mains
The heater does not work
No voltage in the electric
mains
Check presence of voltage in
the electric mains
Breakdown of the electric
cable
Check integrity of the electric
cable and if necessary
replace it, contact the
authorized service center
The automatic circuit breaker
of the electric mains is faulty
Check operability of the
automatic circuit breaker and
replace the faulty circuit
breaker if necessary
Breakdown in the heating
element circuit
Contact the authorized
service center
11. UTILIZATION RULES
After the lifetime of the device expires, it should be recycled in compliance with the
laws, rules and methods in region of recycling. Detailed information about the recycling
of the device, you can receive from a representative of the local authorities, a fter
providing full information about the device. The manufacturer and authorized
organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the
requirements of legislation on utilization and methods of utilization of the device selected by the
Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device
and warranty terms are specified in the warranty card. The warranty card is an integral part of
the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it
from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s
form. The manufacturer and the authorized organization of the manufacturer remove
responsibility for any possible harm which can be caused to people, animals or property directly
or indirectly, if this harm occurred as a result of noncompliance with the rules and operating
