Hyundai H-HG1-42-UI577 - Инструкция по эксплуатации - Страница 9

8.

Gas ceramic heater

EN

IMPORTANT! 

All gas joints and pipes should be absolutely tight to exclude even slight-
est gas leaks. Never use matches, lighters, and other sources of open 

lame for leak checks of joints. Use soapy water. 

It is prohibited to use the gas-ired heater in lats of high-rise buildings, 

bedrooms, bathrooms, and cellars. 

Upon irst ignition, it is recommended to preliminarily switch the heater 

on outdoors, ater which it can be used indoors. 

The room, where the gas-ired heater is used, should be equipped with 

natural ventilation. 
Do not use the heater during sleep. 

Always use only certiied, recommended by the manufacturer, and prop

-

erly rated hoses/pressure reducers for connection of the appliance. 
Always use only the gas type indicated by the manufacturer.

IMPORTANT! 

During operation of the appliance, watch that the gas cylinder is always 
strictly vertical. Use of the cylinder in any other position may result in 
occurrence of an emergency situation, breakdown of the appliance, and 

inliction of a signiicant damage to you and/or your property. 

It is prohibited to move or anyhow cover the heater during operation, as 

well as ater shutdown, if the heater is still hot. 

The heater should be placed for operation so that its face plate is direct-
ed towards the room center. At that, distances to walls or other objects 
on sides and behind the appliance should be at least 1 m.

4. Install a paronite/rubber spacer inside the cap nut checking its integrity beforehand and then 
carefully screw the nut on the outlet of an already prepared gas cylinder having appropriate 
capacity (a gas cylinder is not included in the delivery set and purchased separately). Twisting of 
the hose is strongly not allowed. 
5. Slowly turning the gas pressure controller (cylinder check valve), make sure that no gas leaks 
are present. For that: 
- Lubricate all joints with soapy water. Gas leaks cause formation of bubbles in permeable places. 
- NEVER USE MATCHES OR LIGHTERS for gas leak checks. 

If you ind a gas leak, shut gas and contact your dealer or manufacturer’s service center. 

6. Install the gas cylinder to the dedicated place inside the appliance and secure with the clamp. 
7. Carry the heater to the supposed place of operation observing the rules and precautions 
described in Section 2 of this Instruction Manual. 
8. The appliance is ready for work.

NOTE: 

Heater can be supplied with the connected gas hose and gear, in this 

case to produce the above steps are not necessary.