Обогреватели Hyundai H-FH2-F11MC - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IM2022
10
*The image is provided as a reference and may differ from the actual instrument
1. Operation mode switch
2. Instrument housing
3. Air flow outlet grate
7.
OPERATION OF THE DEVICE
1. Do not install the appliance on unstable or uneven surfaces.
2. To avoid electric shock, do not insert or remove the plug from the outlet with wet hands.
3. For the normal operation of the device, the voltage level in the network must be sufficient in accordance
with the technical parameters specified on the device.
4. The device must be installed strictly vertically.
5. Do not use the device in areas with a high dust content. Otherwise, a large amount of dust in the device
may cause it to fail and refuse warranty service.
ATTENTION!
Never use the appliance in a horizontal or inclined position.
8.
CLEANING AND MAINTENANCE
Make sure that the appliance is de-energized before starting preventive cleaning.
Recommendations for regular cleaning:
Disconnect the appliance from the mains by unplugging the power cord from the electrical outlet, allow the
appliance to cool down, then wipe the housing with a soft, slightly damp cloth.
For cleaning, it is not recommended to use detergents, including those with abrasive compositions.
Do not damage the surface of the appliance with sharp objects.
9.
TROUBLESHOOTING
If it is impossible to fix these malfunctions with these methods, contact the authorized service center.
Malfunction
Possible cause
Solution
The device is connected
to the mains, operating
mode is set to heating but
device
doesn’t work.
No power
Check whether the power
supply is disconnected from
the device and, if necessary,
connect device to power supply
Electrical circuit of heating
element malfunction
Contact an authorized service center
Malfunction in circuit breaker
Change the circuit breaker
Defective thermostat
Contact an
authorized service center
Defective heating element
Faulty temperature limiter
Power cord is broken
Contact an
authorized service center to fix it
Heating is not good enough
Low voltage in
power network
Check power network
Low heating temperature is set
on thermostat
Set the temperature higher on
thermostat
Defective heating element
Contact an authorized service center
10. STORAGE
Complete all requirements of chapter CARE AND CLEANING
Keep the appliance in a cool, dry place.
11. UTILIZATION RULES
