Elenberg H-160920 - Инструкция по эксплуатации - Страница 7

7

•  Please read this guidance carefully before using your oil radiator, so that 

you can use it correctly.

•  Please keep well with this guidance.

The  oil  Radiators  adopt  the  electron  thermal-tube  as  heating  element  to 

heat the oil sealed in. This series of product has the features as high quality 

and long using life. It is suitable for family and office.

1.  High quality and long using life.

2.  High  efficiency  heating  oil  sealed  in,  quickly  heating,  without  peculiar 

smell, without noise.

3.  There are two switches and change into three different power.

4.  There is temperature fuse for fear of over heating.

5.  Using conveniently and easy to collect.

6.  Truckled design, easy to move.

1.  The radiator should be placed on flat ground. You must not place it pre

-

cipitately or tipsily.

2.  Please do not use the radiator in the place where full of combustible or 

explosive gas, bathroom or a shower or a swimming pool.

3.  Please do not put your hand or stick into the hole or slot of the radiator 

for your safety. (Especially for children).

4.  When  using,  the  distance  between  the  radiator  and  the  wall  and  any

-

thing  other  things  should  be  above  20  cm.  Within  1  m  above  its  top 

there should not have any other thing for the gas convection.

5.  Please do not use the same electrical outlet with other appliance.

6.  In order to avoid overheating, do not cover the heater.

7.  The heater must not be located immediately below an electrical socket-

outlet.

8.  If you want to clean the radiator, please put off the plug-in first.

9.  This radiator is filled with a precise quantity of special oil. Repairs re

-

quiring opening of the oil container are only to be made by the manu

-

facturer or his service agent who should be contacted if there is an oil 

leakage.

10. Regulations concerning the disposal of oil when scrapping the appliance 

have to be followed.

11. If the supply cord is damaged, it must be replaced by the manufacturer 

or its service agent or a similarly qualified person in order to avoid haz

-

ard.

12. If nobody is in, please put off the plug-in.

INTRODUCTION

BRIEF INTRODUCTION OF THE PRODUCT

FEATURE

IMPORTANT SAFEGUARDS