BRAYER BR4804 - Инструкция по эксплуатации - Страница 9

9

EN

Fan heater oscillation mode

• 

Press the button (9) «

» on the control panel (3) or the 

button (16) « 

 » on the remote control (18) to switch 

the body oscillation mode on, the symbol «

» will 

appear in the operation mode icons row (11). To switch 

the oscillation mode off, press the button (9) «

» or 

(16) « 

 » again, the symbol 

« » on the control panel (3) will go out.

TIMER SETTING

• 

Press the timer on/off button (10) «

» on the control 

panel (3) or the button (17) « 

 » on the remote control 

(18) and set the requited timer operation time, the 

symbol «

» will appear in the operation mode icons 

row (11).

•  Time setting range is up to 8 hours.

•  The timer operation time is indicated with the digital 

symbols (12) on the control panel (3). 

• 

To switch the timer off, consequently press the button 

(10) «

» or the button (17) « 

 » until the digital 

symbols (12) show the room temperature.

Room heating temperature setting

• 

Press the buttons (8) «–/+» on the control panel (3) or 

the buttons (15) «–/+» on the remote control (18) to set 

the required room heating temperature.

•  The temperature setting range is from 10 to 49 

degrees, the temperature is displayed on the control 

panel (3) with digital symbols (12).

• 

Switching the fan heater off

• 

Switch the fan heater off by pressing the on/off button 

(6) «

» on the control panel (3) or the button 

(13) «   » on the remote control (18).

• 

Note: 

— after pressing the buttons (6,13), the 

heating element will switch off, but the fan will 

continue to operate for 30 seconds to cool the 

heating element.

• 

After the fan stops, switch the power off by setting 

the switch (5) to the position «0».

AUTOMATIC EMERGENCY SWITCH-OFF 

FUNCTION IF THE OUTGOING AIR IS TOO 

HOT

•  If the outgoing air temperature exceeds the 

acceptable value, the automatic thermal switch will 

switch on, and the fan heater will be switched off.

•  Set the power switch (5) to the position «0» and 

unplug the unit, let the fan heater cool down for 

approximately 15-25 minutes (depending on the air 

temperature in the room) and only after that you can 

switch the unit on again.

• 

Make sure that the front (2) and rear grids  are not 

blocked with foreign objects.

• 

Insert the power plug into the mains socket and 

switch the fan heater on.

• 

If the fan heater does not switch on, it may be caused 

by another malfunction. In this case apply to a 

service center for repairing of the fan heater.