Навигаторы Navitel MS500 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4 |
USER MANUAL
EN
Choosing a place to install on the windshield
1. Pay particular attention to the installation location of the
navigator. Do not install in places where the navigator may
interfere with the airbags or reduce driver’s field of vision.
2. Pay attention to the cleanliness of the installation surface; it
must not be dusty, dirty or wet. There should be no air bubbles
or protective film on the mount’s suction cup, as this affects the
force of fixation to the windshield. Damage to the navigator
or other objects in the car which was caused by a fall due to
disconnection from the mount are the sole responsibility of
the user and are not a guarantee case.
3. If the windshield has a built-in window defogger or UV
protection, GPS reception may be impaired.
Using Device in Vehicle
Setting up the “suction cup” type of mount on the windshield
- Remove the protective film from the mount’s suction cup;
- Choose a suitable place on the windshield or side window;
- Attach the suction cup to the selected spot on the windshield
and fix the DVR mount by turning the latch.
With proper use, the mount’s suction cup attaches the device well
to the windshield/side window, but if you leave the fixed mount
in the car at night, the fixing force may weaken due to moisture
condensation in the suction cup with a decrease in temperature.
To prevent damage to the navigator, mount or other things in the
car, it is recommended to remove the navigator and the mount
from the glass at night.
