SVEN AP-B500MV - Инструкция по эксплуатации - Страница 14

Bluetooth technology

•

  Wireless data transfer via the Bluetooth protocol enables to connect wireless head- 

phones to compatible devises. Maximum radius of action of data transfer is 10 m. Such 

obstacles as walls or other electronic devices can interfere with the signal transfer.

Headset to a device interfacing

•

  It is necessary first to interconnect the device with a signal source (see the connection 

diagram in Fig. 2) to transfer signals via Bluetooth. To do this, turn on the headset,  wait for 

starting the search mode – the LED indicator 

d

 will alternate blue light with red one. 

•

  It is necessary to select the search mode of de vices with Bluetooth on a signal source 

(telephone, notebook, smartphone, etc.). “SVEN AP-B500MV” massage will be displayed 

on the screen, which is to be connected to*.

•

 If connection is successful, there will be a short beep signal in the headphones; the 

search mode indication on the headphones is over. If no devices is connected, head- 

phones will turned off automatically in 2 minutes. If the device interfacing has, been failed, 

it is necessary to switch the system in the search mode once more (turn off and on)**.

• 

The indicator 

d

 on the headphones blinks blue short during the data exchange 

(listening music) with a device connected via Bluetooth.

*  You might have to enter “0000” code to connect some models of devices via Bluetooth.

** If the item has been already registered in the device list of a source, then the second 

search mode activation is not obligatory. Choose only the item name “SVEN AP-B500MV” 

and the “connect” command on the source.

The use in the wired mode

•

The device can be used as stereo headphones in the wired mode. In order to connect 

them to a sound source with the included cable via jack 

f

. 

Fig. 2. Connection diagram

Mobile device

PC

Headphones

ENG

14

Wireless Stereo Headphones

with Microphone