Philips TAA3206 - Инструкция по эксплуатации - Страница 13

8 Frequently 

asked 

questions

My Bluetooth headphone does not turn 
on.

The battery level is low. Charge the 
headphone.

I cannot pair my Bluetooth headphones 
with my Bluetooth device.

The Bluetooth is disabled. Enable the 
Bluetooth feature on your Bluetooth 
device and turn on the Bluetooth device 
before you turn on the headphone.

The Bluetooth device cannot find the 
headphone.

•  The headphone may be connected to 

a previously paired device. Turn off the 
connected device or move it out of 
range.

•  Pairing may have been reset or the 

headphone has been previously 
paired with another device. Pair the 
headphone with the Bluetoot device 
again as described in the user manual. 
(see ‘Pair the headphone with your 
Bluetooth device at the fist time’ on 
page 6).

My Bluetooth headphone is connected to 
a Bluetooth stereo enabled mobile phone, 
but music only plays on the mobile phone 
speaker.

Refer to the user manual of your mobile 
phone. Select to listen to music through 
the headphone.

The audio quality is poor and crackling 
noise can be heard.

•     The Bluetooth device is out of range.
       Reduce the distance between your 
       headphone and Bluetooth device, or 
       remove obstacles between them.
•     Charge your headphone.

The audio quality is poor when streaming 
from the mobile phone is very slow, or 
audio streaming does not work at all.

Make sure your mobile phone not only 
supports (mono) HFP but alos supports 
A2DP and is BT4.0x (or higher) compatible 
(see ‘Technical data’ on page 8).

I hear but cannot control music on my 
Bluetooth device (e.g. play/pause/skip 
forward/backward).

Make sure the Bluetooth audio source 
supports AVRCP (see ‘Technical data’ on 
page 8).

The volume level of the headphone is toot 
low.

Some Bluetooth devices cannot link the 
volume level with the headphone through 
volume sync. In this case, you have to 
adjust the volume on your Bluetooth 
device independently to achieve an 
appropriate volume level.

I cannot connect the headphone to another 
device, what do I do?

•  make sure the Bluetooth function of the 

previous paired device is turned off.

•  Repeat the pairing procedure on your 

second device (see ‘Pair the headphone 
with your Bluetooth device at the first 
time’ on page 6).

For further support, visit www.philips.com/support.