TF-HS1004B - Инструкция по эксплуатации - Страница 4

Наушники TF-HS1004B - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 14
Загружаем инструкцию
background image

Instruction manual

3

Important safeguards

•  The instruction manual contains important 

operating and maintenance instructions. For  
your safety, it is necessary to refer to the  
manual. Keep the manual for future use.

• Do not disassemble the unit yourselves 

Refer servicing to qualified service personnel. 

All illustrations in this manual are  

schematic images, which may differ from  
actual objects.

Operation

• Carefully insert the earbud into the ear

canal and make sure it does not fall out if 
you shake your head. 

• When receiving a call, slightly touch the

earbud or use your phone directly to 
answer the call.

• When receiving a call, touch and hold

the earbud for two seconds to refuse 
the call. 

• Gently touch the earbud to play and 

pause music.

• Touch the left earbud three times

to go to the previous track. Touch the right 
earbud three times to go to the next track.

• Pairing is required once per device. If

you want to pair the earbuds with a new 
device, switch them off and unpair from the 
existing device, then repeat the above steps 
with a new device.

• The wireless range is approximately

within 10 meters in direct line of sight.

Charging

Before using the device, fully charge the 

earbuds and the charging case. To do so, 
insert the earbuds into the L (left) and R 
(right) slots inside the case. Charging will 
start automatically.

Plug the USB cable into the power adapter 

and into the device (power adapter not 
included) for charging, to charge the earbuds 
and the charging case at the same time.

The LEDs on the charging case will flash in 

blue

 and stop flashing when fully charged.

Switching on/off

Switch on: The earbuds are switched on 

automatically when you take them out of the 
charging case.

Switch off: Touch the earbud and hold for 

3-5 seconds to switch it off. Alternatively, you 
can put it in the charging case after which it 
will also switch off. The earbuds will also 
switch off when your bluetooth device is out 
of range longer than 5 minutes.

When the two earbuds are paired (TWS 

mode), they can switch off at the same time. 

       Interruption of sound transmission is 
not a defect in the earbuds, but may 
happen due to the loss of a signal from the 
control device.

• For iOS devices: touch and hold the 

earbud to activate Siri.

Bluetooth pairing

Open the top cover of the charging case 

and take out the earbuds, they will pair with 
each other automatically. 

Turn on bluetooth on your device, find the 

"TF-1003B" in the device list, click on the 
connection. 

The earbuds are now successfully paired 
with your device. 

       Each of the earbuds can be paired 
and used separately with different 
bluetooth devices.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к TF-HS1004B?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"