Takstar HD2000 - Инструкция по эксплуатации - Страница 4

1. Clean the earpads after using for a certain period of time. Please wipe 

     the  polyester  foam  earpads  with  neutral  soap  water  or  detergent;

     please  wipe  the  plastic  or  leather  earpads  with  dry  cloth  directly, 

    clean in the water directly is prohibited.

2. Volume adjusting should be from low to high, sudden loud volume 

    will damage the headphone.

3.  Headphone  is  not  allowed  to  contact  with  strong  magnetism, 

    otherwise the permanent magnet will lose its magnetism, thus reduce 

    the headphone sensitivity and affect the sound quality.

4. Avoid dropping or hitting.

5. The diameter and length of the headphone connector should match 

    that of the socket, connector should be inserted into the headphone 

    socket of devices such as iPod, Mp3. Mp4,  PC ect.

Correct Usage 

1. Pay attention to insert the connector into the device completely to 

    avoid contact NG(no sound or staccato).

2. For adult, headphone listening time should be less than 2-3 hours 

    per day, continuous listening time should be less than half an hour 

     and  the  volume  should  be  within  40-60dB  (smaller  than  normal 

    speaking).

3. Volume adjusting should be from low to high to adapt the ears, it 

    will harm your ears if the volume is too loud suddenly.

4.  Do  not  exclude  the  ambient  noise  by  increasing  the  headphone 

    volume such as in a bus, subway, nosiy street etc, it requires 70-80

     dB  under  such  environment  and  you  need  to  increase  the  volume 

    to 100dB so that you can hear, thus will seriously harm your ears.

Maintenance

PROFESSIONAL MONITOR HEADPHONES