Edifier W820NB Plus - Инструкция по эксплуатации

EN  1. Power ON/OFF

2. Pairing

3. Reset

4. Charging

5. Connecting to PC as wired headphones

6. Controls

For more information, please visit our website:

www.edifier.com

@Edifier_Global

@Edifier_Global

@Edifierglobal

Model: EDF200118
Edif er International Limited
P.O. Box 6264
General Post Off ce
Hong Kong

www.edif er.com
    2022 Edif er International Limited. All rights reserved.
Printed in China

NOTICE:
For the need of technical improvement and system upgrade,information
contained herein may be subject to change from time to time without prior 
notice.   
Products of EDIFIER will be customized for different applications. 
Pictures and illustrations shown on this manual may be slightly different 
from actual product. 
If any difference is found, the actual product prevails.

Wireless Noise Cancellation Over-Ear Headphones

W 8 2 0 N B   P l u s

Manual

3s

Indicator

Indicator

Indicator

Note:

Under wireless mode: 1. If there is no Bluetooth connection for 5 minutes after 
power on, the headphones will turn off automatically. 2. If there is no Bluetooth 
connection when the noise cancellation is on, the headphones will turn off 
automatically after 4 hours. 

1. Power ON: press and hold the "     " key for 
    about 3s when powered OFF until the LED 
    blinks blue.
2. Power OFF: press and hold the "     " key for 
    about 3s when powered ON until the LED 
    blinks red.

Pairing for new device

1. Press and hold the "     " key for about 6s when powered off to skip the latest 
    connected device and pair the new Bluetooth device. Blue and green LED 
    will blink alternately and rapidly.
2. Select "EDIFIER W820NB Plus" in your device setting to connect. Blue LED 
    will blink twice after connected.

Pairing for the f rst time

1. Press and hold the "     " key for about 3s 
    when powered off. Blue and green LED 
    will blink alternately and rapidly.
2. Select "EDIFIER W820NB Plus" in your device 
    setting to connect. Blue LED  will blink twice 
    after connected.

Note: 

For subsequent use, the headphones will automatically connect to the device 
used last time.

Simultaneously press and hold the "     " "     " 
keys for about 5s when powered on to clear 
pairing records. Blue LED will blink 6 times 
rapidly when successful.

5s

1. Connect the small end of the included USB cable to 
    the USB-C port of the headphones and connect the 
    other end to a USB-A power supply or wall charger
    (not included).
2. Orange LED is steady lit when charging and off when 
    fully charged.

Note:

Please do not charge the headphones when there is sweat or other liquids
inside the charging port, which may damage the headphones.

Input: 5V      1A 

1. Connect the small end of the included USB cable to the USB-C port of the 
    headphones and connect the other end to the USB-A port of the PC. You 
    can listen to music,  talk and charge the headphones after the connection 
    is successful.
2. Orange LED is steady lit when charging and green LED is steady lit when 
    fully charged.

Note: 

It is recommended to use the included USB cable, and other cables may have 
compatibility issues that prevent them from working properly.

x2

3s

x1

x2

x1

x1

6s

x1

x2

x1

x1

x1

ANC

Note: 

1.       : Press and hold.
2. Default sound control: noise cancellation & ambient sound.
3. Images are for illustrative purposes only and may differ from the actual 
    product.
4. Download Edif er Connect App for more customizable control settings.

i

i

i

i

i

i