Edifier Stax Spirit S3 - Инструкция по эксплуатации

EN  1. Power ON/OFF

2. Pairing

6. AUX Cable

7. Controls

8. Ear cushion replacement method

1. Power ON: Press and hold the MFB button for 3s when power OFF. 
2. Power OFF: Press and hold the MFB button for 3s when power ON. 

1. Press and hold the MFB button for 3s when power off. Red and Blue LED 
    will blink alternately and rapidly.
2. Select "EDIFIER STAX SPIRIT S3" in your device setting to connect. Blue LED 
    will blink twice per 5s after connected.

Note:
1. For subsequent use, the headset will auto-connect to device used last time.
2. Press and hold the MFB button for 5s when power off to skip the latest 
    connected device and pair the new Bluetooth device.

3s

3s

3. Reset

1. Power on and disconnected to any Bluetooth devices.
2. Simultaneously press and hold the "+" "-" buttons for 5s to reset and start 
    Bluetooth pairing.
3. Blue LED will blink 6 times rapidly when successful.

5s

4. Dual Connectivity

5. Charge

1. Pair device A with the headphone. Upon success, disconnect the Bluetooth 
    of device A or power off the headphone and long press the MFB button of 
    headphone for 5s to enter the pairing mode.
2. Select "EDIFIER STAX SPIRIT S3" in device B to connect succesfully.
3. Select "EDIFIER STAX SPIRIT S3" in device A to connect manually. Blue LED 
    will blink twice per 5s when successful.

1. Please connect the product to power source with the included Type-C
    charging cable for charging.
2. Red LED is steady lit when charging and off when fully charged.
   
Input: 5V      1.5A

1. Connect the AUX cable to the headphone when power on, and the
    headphone will switch to the AUX in sound source state; connect the
    AUX cable to the headphone when power off, the headphone will not
    power on automatically, need to press and hold the MFB button for 3s to
    turn on.
2. Unplug the AUX cable from the headphone and the headphone will power
    off automatically.
3. Green LED is steady lit when in the AUX in sound source state.

x2

x1

x1

x2

x1

x1

x1

x3

Note:

1.        : Press and hold.
2. Please do not charge the headset when there is sweat or other liquids 
    inside the charging port, which may damage the headset.
3. Images are for illustrative purposes only and may differ from the actual 
    product.
4. Download Edifier Connect App for more customizable control settings.

A

B

EDIFIER STAX SPIRIT S3

EDIFIER STAX SPIRIT S3

5s

For more information, please visit our website:

www.edifier.com

@Edifier_Global

@Edifier_Global

@Edifierglobal

Model: EDF200071

Edifier International Limited

P.O. Box 6264

General Post Office

Hong Kong

www.edifier.com

    2022 Edifier International Limited. All rights reserved.

Printed in China

NOTICE:

For the need of technical improvement and system upgrade, 

information contained herein may be subject to change from time to 

time without prior notice.   

Products of EDIFIER will be customized for different applications. 

Pictures and illustrations shown on this manual may be slightly 

different from actual product. 

If any difference is found, the actual product prevails.

W i r e l e s s   O v e r - E a r   H e a d p h o n e s

S 3

Manual