VITEK VT-6600 BK - Инструкция по эксплуатации - Страница 4

    English

4

• 

Do not connect FM antenna to outer aerial. 

• 

Disconnect from wall outlet before cleaning. Use soft damp cloth for 
cleaning the unit. It is forbidden using liquid or aerosol detergents.

Attention!

Follow the instructions listed below in order to avoid unit damages:
• 

Install battery correctly, following polarity according to marks on the unit.

• 

If you are not going to use the unit for a long time, extract the battery.

• 

Replace the battery in proper time.

Connecting to AC power supply line

This appliance is powered by AC mains supply, voltage 0-0 V and frequency 
50 Hz. Make sure mains voltage meets unit’s operating voltage before connec-
tion.

Battery power supply

This appliance is equipped with batteries used as reserve power source. Do fol-
lowing to enable batteries:
1.   Disconnect the unit from the wall outlet.
.   Open battery compartment lid (1).
.   Insert battery of CR 0 type,  V, following polarity (not included into 

delivery set).

4.   Close battery compartment lid.

Setting current time

1.  Holding button () depressed set hour digits by clock set button (6).
.  Similarly, holding button () depressed set minutes digits by minutes set 

button (4).

Setting alarm

You can use tuner as source of alarm sound signals. Set switch () into position 
Radio.

1.  Holding alarm set button (8) depressed set hour digits by clock set button 

(6). 

.  Similarly, holding button (8) depressed set minutes digits by minutes set 

button (4). 

.  Press button ALARM On/Off (5) to switch alarm on. Symbol of alarm will 

appear on LCD. Pre this button once more to switch alarm off. Symbol of 
alarm will go out.

6600IM.indd   4

25.12.2007   14:44:02