Настольные часы VITEK VT-3548 SR - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENGLISH
5
Attention!
Please dispose of used unit and
batteries in an ecologically safe manner
Setting the Alarm time
ALARM 1 setting
On the ALARM 1 Display:
- Press MODE key, the icon “AL 1” will be dis-
played. Select the alarm number 1 by pressing
UP or DOWN key.
- Press and hold MODE key for about sec-
onds, the hour digits start blinking. You can set
them by pressing UP or DOWN key.
- Press MODE again to set the Alarm time. The
icon [
1
] appears on the display.
ALARM 2 setting
On the ALARM Display:
Press MODE key, the icon “AL ” will be dis-
played. Select the alarm number by pressing
UP or DOWN key.
- Press and hold MODE key for about sec-
onds, the hour digits start blinking. You can set
them by pressing UP or DOWN key.
- Press MODE key again to set Alarm time. The
icon [
2
] appears on the display.
Enable Alarm 1/Alarm 2:
- Press ALARM key once to enable ALARM 1.
The icon [
1
] appears on the display.
- Press ALARM key again to enable ALARM .
The icon [
2
] appears on the display.
- Press ALARM key again to enable both ALARM
1 and ALARM . The icons [
1
] and [
2
] appear
on the displays.
- Press ALARM key once more to disable both
ALARM 1 and ALARM . The icons [
1
] and [
2
]
disappear.
Activating the Alarm
When the ALARM 1/ALARM is ringing, the rel-
ative alarm icon [
1
]/[
2
] is blinking.
- Press ALARM key to turn the alarm off.
- Press button [SNOOZE/LIGHT] to pause the
alarm for a while. The backlight is on for 5 sec-
onds. Afterwards it is switched off automatical-
ly. The repeat alarm indicator (Z Z) is flashing
on the display while the alarm is paused. The
alarm will be activated again after 4 minutes.
- If the alarm is not turned off, it will be stopped
automatically after 4 minutes.
12/24 time scale display
Press UP key to change the mode of time dis-
play.
Foreign Time Display & setting
- Press and hold UP key for seconds. The icon
“ ” appears on the display.
- Press and hold MODE key for seconds in
Foreign Time &Temperature display. The
Foreign time can be set as described above by
pressing UP or DOWN key.
3548IM_new.indd 5
26.02.2008 16:21:56
