FIRST AUSTRIA FA-2416-1 - Инструкция по эксплуатации - Страница 2

2

3

iNSTRUCTioN MANUAl

FM CloCk RAdio

loCATioN oF CoNTRolS 

(see fig. 1)

PoWER CoNNECTioN

Plug the AC power cord to a household outlet AC source. This unit is equipped 

with a battery back up system, it requires a 1x3V CR2032 Flat Lithium battery 

(Not included). Insert the battery in the battery compartment, making certain 

that the positive and negative (+ and -) battery terminals are attached to the 

corresponding terminals on the plate in the battery compartment. If an AC 

power failure occurs, the clock automatically switches to the battery power 

supply, the clock and timer memory continue running. When the AC power 

resumes, the clock switches back to AC again. 

TiME ANd CAlENdAR MANUAl SETTiNg 

Press Time set button (5), in standby mode, and keep depress over 2 seconds 

to enter time set mode, after enter the setting mode, press clk.adJ button (5) 

to change the mode cycle as follows: 
Normal —> Year —> Month —> Day —> 12/24H —> Real time Hour —>  

Real time Min —> Normal
Action (during data adjustment):

•  Press <</Tune- button (6) to adjust data backward. 

•  Press >>/Tune+ button (7) to adjust data forward. 

•  Keep depress << or >> button for 2 seconds to enable auto forward. 

•  Use clk.adJ (5) button to confirm each setting.

AlARM

SETTiNg AlARM 

Press the alarm set button (2/3) during normal mode to show the alarm time. 

Afterwards keep depress the alarm set button (2/3) over 2 seconds to enter the 

alarm set mode. After enter the setting mode, press the alarm set button (2/3) 

to change the mode cycle as follows :
Normal —> AL 1 Hour —> AL 1 Min —> AL 1 weekday Alarm —> AL 1 wake 

beep —> AL 1 wake radio —> AL 1 wake radio volume —> Normal
Normal —> AL 2 Hour —> AL 2 Min —> AL 2 weekday Alarm —> AL 2 wake 

beep —> AL 2 wake radio —> AL 2 wake radio volume —> Normal
Select alarm weekday mode as follows

1-5: Monday to Friday 

1-7: Whole week

6-7: Saturday & Sunday

1-1: One day of week
Action (during data adjustment): 

•  Press <</Tune- button (6) to adjust data backward. 

•  Press >>/Tune+ button (7) to adjust data forward. 

•  Keep depress << or >> button for 2 seconds to enable auto forward. 

•  Use alarM 1/2 (2/3) button to confirm each setting.
AlARM dURATioN 

Beep alarm or radio alarm will continue output for 30 minutes if no key press, 

then it will stop automatically and wait for same alarm time on next day. 
ENABlE/diSABlE THE AlARM 

Press and hold the “ALARM 1” (2)/“ALARM 2” (3) button to enable or disable 

the alarm. Once the alarm is activated, the bell symbol will be appeared on the 

display.
SNooZE FUNCTioN 

When Alarm rings, press Snooze button (4) to suspend the alarm & to activate 

the snooze function, Beep or Radio alarm will stop. 9 minutes later the alarm 

will ring again. Press SNOOZE key again, alarm will be suspended again, 

another 9 minutes later the alarm will ring again and so on until the next alarm 

rings.
Note: The interval time of the Snooze function is 9 minutes.

-  If you want to disable the SNOOZE function and stop alarm completely, 

press Radio ON/OFF button (9). If you don‘t press any button, the alarm 

will ring during 30 minutes & stop automatically.

-  Icon of AL1 and AL2 will blink as long as Snooze function is still operating. 

Once Snooze is turned off icon of AL1/AL2 stop blinking and lights on the 

display.

diSPlAy ligHT oN/oFF FUNCTioN:

•  Press MEMORY/MEMORY+/NAP/AUTO OFF DISPLAY button (1) for 3 

seconds, the LED display Indicator will light on, the LED display will turn 

off after 15 seconds automatically. Press any button to maintain the LED 

display for 15 seconds. 

•  Press MEMORY/MEMORY+/NAP/AUTO OFF DISPLAY button (1) for 3 

seconds, the LED display indicator will light off to cancel this function.

AUTo CHANgE diSPlAy CoNTENT (see fig. 2)

In radio off mode, press the VOLUME UP/DISPLAY AUTO CHANGE ON/OFF 

8) button and keep depressed over 2 seconds to enter time AUTO CHANGE 

DISPLAY mode (“ON” will appear on the display).

the Year will be displayed and press again to display Month/Day, the display 

returns to time display after 5 seconds, and will display again the same info in 

cycle.

Press and keep depressed over 2 seconds again to turn off AUTO CHANGE 

DISPLAY mode («OFF» will appear on the display).

liSTENiNg To RAdio

Press the ON/OFF RADIO/ALARM OFF button (9) to turn the unit on. 

Use the Tune+ or Tune- button to select the desired FM station. If you press 

and hold the Tune+ or Tune- button for one second, the release, the unit will 

automatically scan to the next broadcasting station. 

Press the ON/OFF RADIO/ALARM OFF button (9) to turn the radio OFF.

1.  MEMORY/MEMORY+/NAP/AUTO 

OFF DISPLAY

2.  alarM 1 on/oFF sEt

3.  alarM 2 on/oFF sEt

4.  SNOOZE/SLEEP/DIMMER

5. clk.adJ.

6.  <</TUNE-/YEAR/MONTH/DAY

7.  >>/TUNE+/DST

8.  VOLUME UP/DISPLAY AUTO 

changE on/oFF

9.  ON/OFF RADIO/ALARM OFF

10. VOLUME DOWN

11.  DISPLAY

12. BATTERY COMPARTMENT

13. RATING LABEL (REAR OF UNIT) 

14. spEakEr

15.  FM antEnna

16. AC POWER CORD

17. PM INDICATOR

18. STANDBY INDICATOR

19. ALARM 1 INDICATOR

20. alarM 2 indicator

N
i

1

EN

gli

SH

EN

gli

SH

2