FIRST AUSTRIA FA-2406-2 - Инструкция по эксплуатации - Страница 2

2

3

iNSTRUCTioN MANUAl

FM CloCk RAdio
FUNCTioN ANd CoNTRolS 

(see fig. 1)

PoWER CoNNECTioN

Plug the AC power cord to a household outlet AC source. This unit is equipped 

with a battery back up system, it requires a 1x3V CR2032 Flat Lithium battery (Not 

included). Insert the battery in the battery compartment, making certain that the 

positive and negative (+ and -) battery terminals are attached to the corresponding 

terminals on the plate in the battery compartment. If an AC power failure occurs, the 

clock automatically switches to the battery power supply, the clock and timer memory 

continue running. When the AC power resumes, the clock switches back to AC again. 

TiME MANUAl SETTiNg 

In standby mode, press and hold the SET.MEM/M+ button (2). 

“24 Hr” will blink. Press the TUNE+ (5) or Tune- (1) button to set the hour format 

between 12 hour (12 Hr) format and 24 Hour (24 Hr) format. 

Press the SET.MEM/M+ button (2) and the hours will blink. 

Press the Tune+ (5) or Tune- (1) to set the current hour. 

Press the SET.MEM/M+ (2) button again then the minute digits will blink. Press the 

TUNE+ (5) or Tune- (1) to set the current minutes. 

Once setting done, press SET.MEM/M+ (2) button once again to indicate the current 

time is set. 

AlARM SETTiNg 

Press the AL.1/AL.2 button (6/7) once to preview the alarm time. 

The alarm time is displayed and will blink, press & hold the AL.1/AL.2 button (6/7) for 

3 seconds and the hours will blink. Press the TUNE+ (5) or Tune- (1) to set the alarm 

hour. 

Press the AL.1/AL.2 button (6/7) again; the minute digits will blink. Press the TUNE+ 

(5) or Tune- (1) to set the alarm minutes. 

Press the AL.1/AL.2 button (6/7) to set the alarm sound mode: Buzzer or Radio. The 

alarm sound mode will blink. Press TUNE+ (5) or Tune- (1) to set the alarm sound 

mode. 

If you select alarm sound mode with Radio, the volume will blink on the display. 

Press TUNE+ (5) or Tune- (1) to set the alarm radio maximum volume. Then press 

the AL.1/AL.2 button (6/7) when setting is done. 
Note: when the alarm rings, the volume of the alarm will gradually increase. 

When the alarm 1 or 2 rings, to turn it OFF press on the AL.1/AL.2 button (6/7). Alarm 

1/2 will ring again at the same time the next days. 

To stop completely Alarm 1/2 the following days, press & hold AL.1/AL.2 button (6/7) 

for 3 seconds in standby mode, the alarm 1/2 icon will disappear and Alarm 1/2 will be 

disabled for the next days. 

To resume Alarm 1/2, press & hold AL.1/AL.2 button (6/7) again for 3 seconds in 

standby mode. 

SNooZE FUNCTioN 

When the alarm rings, press Snooze button (3) to suspend the alarm & to activate the 

snooze function, Alarm will stop & will ring again 9 minutes later. Press SNOOZE key 

again, alarm will be suspended again, another 9 minutes later the alarm will ring again 

and so on until the next alarm rings. 
Note: The Snooze interval time is 9 minutes. 

-  To turn the Snooze function off, press once on AL.1/AL.2 button (6/7). 

-  Press and hold the AL.1/AL.2 button (6/7). The alarm icon will disappear to 

indicate the alarm is disabled. 

RAdio ModE 

Note: Ensure that the FM antenna is completely unrolled and extended to have the 

best FM reception. 

Press the ON/OFF button (4) to turn the unit on. 

Use the TUNE+ (5) or Tune- (1) button to select the desired FM radio station. If you 

press and hold the TUNE+ or Tune-button for 3 seconds, then release, the unit will 

automatically scan to the next broadcasting station. 

Press the ON/OFF button (4) to turn the radio OFF. 

To SET/RECAll THE RAdio PRESETS 

Press the ON/OFF button (4) to turn the unit ON. 

Use the TUNE+(5) or Tune- (1)button to select the desired FM station. 

Press the SET.MEM/M+ button (2); “P02” will blink in the display. 

Press the SET.MEM/M+ button (2) again to set the preset. 

Repeat steps 2 through 4 to set more presets. 

The unit can preset 10 stations totally for FM. 

When “P01-P10” is blinking, press the Tune+ (5) or Tune- (1)button to select the 

preset number. 

When recalling preset stations, press SET.MEM/M+ button (2) to select the preset 

number. 

SlEEP oPERATioN

When listening to radio, press Snooze/Sleep button (3) to enter sleep mode. You 

can just adjust the sleep timer from 90mins to 10mins by pressing the Snooze/Sleep 

button (3). The unit will automatically turn off after the selected time. 

RESETTiNg

If the system does not respond or exhibits erratic or intermittent operation, you may 

have experienced an electrostatic discharge (ESD) or a power surge that triggered the 

internal microcontroller to shut down automatically. If this occurs, simply disconnect 

the AC power cord and remove the system backup battery, wait for at least 3 minutes 

and then setup the unit again as if it is a brand new unit. 

WARNiNg

1.  No naked flame sources, such as lighted candles, should be placed on the 

apparatus. 

2.  Do not place the product in closed bookcases or racks without proper ventilation.

3.  Where the mains plug is used as the disconnect device, the disconnect device 

shall remain readily operable. 

4.  The ventilation should not be impeded by covering the ventilation openings with 

items, such as newspapers, table-cloths, curtains, etc.

5.  It shall not be exposed to dripping or splashing and that no objects filled with 

liquids, such as vases, shall be placed on the apparatus. 

6.  Do not connect FM antenna to outside antenna. 

1.  <</TUNE- 

2.  SET.MEM/MEMORY+ 

3.  SNOOZE/SLEEP 

4. on/oFF

5.  >>/TUNE+ 

6.  VOLUME DOWN/ALARM 1 ON/OFF 

sEt 

7.  VoluME up/alarM 2 on/oFF sEt 

8.  BATTERY COMPARTMENT 

9.  rating laBEl

10. alarM 1 indicator

11. DISPLAY

12. alarM 2 indicator

13. spEakEr

14. AC POWER CORD

15. FM  antEnna

N
i

1

EN

gli

SH

EN

gli

SH

M_2406-2_v01.indd   2-3

13-3-15   下午4:05