FIRST AUSTRIA FA-2406-1 - Инструкция по эксплуатации - Страница 2

2

3

iNSTRUCTioN MANUAl

FM CloCk RAdio

FUNCTioN ANd CoNTRolS 

(see fig. 1)

PoWER CoNNECTioN

Plug the AC power cord to a household outlet AC source. This unit is equipped 

with a battery back up system, it requires a 1x3V CR2032 Flat Lithium battery 

(Not included). Insert the battery in the battery compartment, making certain 

that the positive and negative (+ and -) battery terminals are attached to the 

corresponding terminals on the plate in the battery compartment. If an AC 

power failure occurs, the clock automatically switches to the battery power 

supply, the clock and timer memory continue running. When the AC power 

resumes, the clock switches back to AC again. 

TiME MANUAl SETTiNg 

In standby mode, press and hold the SET.MEM/M+ button (2). 

“24 Hr” will blink. Press the TUNE+ (5) or Tune- (1) button to set the hour format 

between 12 hour (12 Hr) format and 24 Hour (24 Hr) format. 

Press the SET.MEM/M+ button (2) and the hours will blink. 

Press the Tune+ (5) or Tune- (1) to set the current hour. 

Press the SET.MEM/M+ (2) button again then the minute digits will blink. Press 

the TUNE+ (5) or Tune- (1) to set the current minutes. 

Once setting done, press SET.MEM/M+ (2) button once again to indicate the 

current time is set. 

AlARM SETTiNg 

Press the AL.1/AL.2 button (6/7) once to preview the alarm time. 

The alarm time is displayed and will blink, press & hold the AL.1/AL.2 button 

(6/7) for 3 seconds and the hours will blink. 

Press the TUNE+ (5) or Tune- (1) to set the alarm hour. 

Press the AL.1/AL.2 button (6/7) again; the minute digits will blink. Press the 

TUNE+ (5) or Tune- (1) to set the alarm minutes. 

Press the AL.1/AL.2 button (6/7) to set the alarm sound mode: Buzzer or Radio. 

Press Tune + (5) or Tune – (1) to choose different volume. The alarm volume 

will gradually increase. Then press the ALARM button when done.

To delay the alarm, press SNOOZE. It will come on again in approx. 9 minutes. 

You may repeat this cycle several times during the alarm cycle. To stop the 

alarm, press ALARM button .

To stop the alarm from coming on the following day, hold the ALARM button to 

turn it off. The alarm icon will disappear to indicate the alarm is disarmed.

SNooZE FUNCTioN 

When the alarm rings, press Snooze button (3) to suspend the alarm & to 

activate the snooze function, Alarm will stop & will ring again 9 minutes later. 

Press SNOOZE key again, alarm will be suspended again, another 9 minutes 

later the alarm will ring again and so on until the next alarm rings. 
Note: The Snooze interval time is 9 minutes. 

-  To turn the Snooze function off, press once on AL.1/AL.2 button (6/7). 

-  Press and hold the AL.1/AL.2 button (6/7). The alarm icon will disappear to 

indicate the alarm is disabled. 

RAdio ModE 

Note: Ensure that the FM antenna is completely unrolled and extended to have 

the best FM reception. 

Press the ON/OFF button (4) to turn the unit on. 

Use the TUNE+ (5) or Tune- (1) button to select the desired FM radio station. If 

you press and hold the TUNE+ or Tune- button for 1-2 seconds, then release, 

the unit will automatically scan to the next broadcasting station. 

Press the ON/OFF button (4) to turn the radio OFF. 

To SET/RECAll THE RAdio PRESETS 

Press the ON/OFF button (4) to turn the unit ON. 

Use the TUNE+ (5) or Tune- (1) button to select the desired FM station. 

Press the SET.MEM/M+ button (2); “P02” will blink in the display. 

Press the SET.MEM/M+ button (2) again to set the preset. 

Repeat steps 2 through 4 to set more presets. 

The unit can preset 10 stations totally for FM. 

When “P01-P10” is blinking, press the Tune+ (5) or Tune- (1) button to select 

the preset number. 

When recalling preset stations, press SET.MEM/M+ button (2) to select the 

preset number. 

SlEEP oPERATioN

When listening to radio, press Snooze/Sleep button (3) to enter sleep mode. 

You can just adjust the sleep timer from 90mins to 10mins by pressing the 

Snooze/Sleep button (3). The unit will automatically turn off after the selected 

time. 

RESETTiNg

If the system does not respond or exhibits erratic or intermittent operation, you 

may have experienced an electrostatic discharge (ESD) or a power surge that 

triggered the internal microcontroller to shut down automatically. If this occurs, 

simply disconnect the AC power cord and remove the system backup battery, 

wait for at least 3 minutes and then setup the unit again as if it is a brand new 

unit. 

WARNiNg

1.  No naked flame sources, such as lighted candles, should be placed on the 

apparatus. 

2.  Do not place the product in closed bookcases or racks without proper 

ventilation.

1.  <</Tune- 

2.  SET.MEM/MEMORY+ 

3.  SNOOZE/SLEEP 

4. on/oFF

5.  >>/TUNE+ 

6.  VOLUME DOWN/ALARM 1 ON/

oFF sEt 

7.  VoluME up/alarM 2 on/oFF 

sEt 

8.  BattErY coMpartMEnt 

9.  rating laBEl

10. displaY

11. spEakEr

12. AC POWER CORD

13. FM  antEnna

N
i

1

EN

gli

SH

EN

gli

SH