Мясорубки Ardesto MGL-2250R - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
22
EN
Mincer
1. Insert the worm shaft into the cutter housing, the plastic end first.
Place the cutter unit onto the worm shaft. (The cutting edges should be at the
front) Place the medium grinding disc or coarse grinding disc (depending on the
consistency you prefer) onto the worm shaft. (Make sure the notch of the grinding
disc fit onto the projections of the mincer head.) Turn the screw ring in the direction
of the arrow on the cutter housing until it is properly fastened.
2. Attach the cutter housing to the motor unit.
3. Place the tray on the upright part of the cutter housing.
4. Now the appliance is ready for mincing.
Cut the meat into 10cm-long, 2cm-thick strips. Remove bones, pieces of gristle and
sinews as much as possible. (Never use frozen meat!)
Put the meat in the tray. Use the pusher to gently push the meat into the cutter
hosing. (For steak tartare , mince the meat with the medium grinding disc twice. )
(fig.7)
Plug the unit on and switch3/4 knob to “3” , then switch ON/0/R knob to “ ON “
position. After use it, Plug the unit on and switch 3/4 knob to “4”, then switch ON/0/R
knob to “ R “ position.
Making kebbe
1. Insert the worm shaft into the cutter housing, the
plastic end first. (fig.8)
Place the cone in the cutter housing.
Place the former on the cutter housing and screw the ring
on the cutter housing. (fig.9)
2. Attach the cutter housing to the motor unit.
3. Place the tray on the upright part of the cutter housing.
4. Now the appliance is ready for making kebbe. (fig.10)
Feed the prepared kebbe mixture through the kebbe
maker. Cut the continuous hollow cylinder into the
desired lengths and user as required.
Kebbe is a traditional Middle Eastern dish made primarily
of lamp and bulgur wheat which are minced together to
form a paste the mixture is extruded through the kebbe
maker and cut into short lengths. The tubes can then be
stuffed with a minced meat mixture, the ends pinched
together and then deep fried.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
