Telefunken TF-PS2304 - Инструкция по эксплуатации - Страница 5

• You can connect the audio output of an

external device to this unit, to listen to the sound 
of that device through the speaker.

• To connect an external audio device,

please use an audio cable with 3.5mm-to-3.5 
mm plugs to connect the headphone out or 
audio line-out of the external device to the 
AUX input of this unit.

• Press MODE button to select the AUX mode.
• Turn on the external device. You can

press the volume buttons on the RC to adjust 
volume.

External device connection

Instruction Manual

4

USB/

MicroSD

 operation

Playback

• When playing, you can press

to play/pause the playback. 

• During the playback you can press

•

• 

Turn on the device.

Insert a microSD (TF) card into the slot.

Or insert a USB drive into the USB 

port. Press the MODE button repeatedly to 

select the USB or MicroSD mode.

the 

  and 

 buttons to go to the previous 

and next track. Rotate the volume indicator 
to adjust volume.

  It may take up to 60 seconds to open 

and verify a large microSD card / USB drive 

with many files.

General 

USB/

MicroSD

 notes

•

This unit is equipped with a microSD slot

and USB port that can read and play MP3 
files stored on standard microSD cards and 
USB drives up to 32 GB.

•

FAT and FAT32 file system is supported

by this unit.

Never remove microSD cards and USB 

drives from the unit during playback, always 
stop playback, then press the MODE button 
to switch to another mode before removing 
the storage to prevent damage to your files 
and cards/drives themselves.

• Press the EQ button to switch

between various equalizer presets. EQ is 
only available in the BT and USB/TF 
modes.

      Slight noise during playback pauses 
is not a construction defect, it is 
determined by the factory presets of the 
dynamic noise reduction system.

      If there is a microSD card or USB 
drive installed in the unit, when powered 
on, playback will automatically start 
from microSD/USB.

FM radio

• Once the search is finished, you can

• Turn on the device.

• Press the MODE button

repeatedly to select the FM mode.

press the 

  and 

  buttons to go to a 

previous or next radio station. Also you 
can input the frequency directly using 
the numeric buttons on the remote.

• Press 

and hold      

 to automatically

scan and save all available radio 
stations. The procedure will take 
several minutes and cannot be 
interrupted.

• Radio frequency can be set

manually using the numeric buttons on 
the remote control.