Telefunken TF-PS2103 - Инструкция по эксплуатации - Страница 4

Instruction manual

3

Important safeguards

• The instruction manual contains important

operating and maintenance instructions. For 
your safety, it is necessary to refer to the 
manual. Keep the manual for future use.

• Do not hit or drop the unit
• Do not

 e

xpose the unit to vibration, direct

sunlight, too high or low temperatures or 
humidity.

• Do not disassemble the unit yourselves

Refer servicing to qualified service personnel

All the illustrations in this manual are 

schematic images, which may differ from 
actual objects.

Power supply

• The unit operates on an internal

rechargeable Li-ion battery and 220V 
mains via power adapter (not included).

• For best results, try to fully charge the

battery before each use. If the battery is 
drained, please allow it to recharge for a few 
hours.

General operation

• You can connect the audio output of an

external device to this unit, to listen to the sound 
of that device through the speaker.

• To connect an external audio device,

please use the supplied 3.5mm-3.5mm mini 
jack audio cable to connect the external 
device to the AUX input of this unit.

• Press 

M

 button to select the AUX mode.

• Turn on the external device. You can

Bluetooth wireless playback

•

This unit can wirelessly playback audio

from any device with Bluetooth A2DP 

function.

•

The wireless range is approximately within

10 meters

 in direct line of sight

.

•

Wireless audio streaming requires pairing

of a Bluetooth device (e.g. smartphone).

HOW TO PAIR YOUR DEVICE TO 

THIS UNIT:

•

Make sure the Bluetooth function is

switched on in your device (e.g. smartphone, 
tablet).

•

Switch on the unit and press the

M

 button repeatedly to select the Bluetooth 

mode (selected by default). 

•

Once the Bluetooth pairing indicator

begins flashing, you will find the unit listed in 
the Bluetooth connections list of your device 
(as TF-PS

2103

).

•

If asked for a passcode, enter “0000”.

•

The initial setup is required only once

per device. The unit will automatically pair to 
the last paired device.

•

The LED indicator will flash when

searching for a Bluetooth device and stay 
on when the devices are paired.

•

When playing files, you can press

button to pause and resume

the 
playback. 

•

Press the      or      button to go 

to a previous or next track. 

Press and 

hold these buttons to decrease or 
increase volume, respectively.

External device connection

•

Put the OFF/ON switch into the ON

position to switch the unit on. Put it into 
OFF position to switch off.

• The battery can be recharged with the

provided USB charging cable. Before first 
plugging the appliance check that voltage 
indicated on the rating label corresponds 
to the mains voltage 

at

 your home.

• Insert the charging cable into the

DC 5V socket on the unit.

• Connect the charging cable to 

a

 power

adapter

 (not included)

. Plug the 

adapter to the power source. 

adjust

 volume 

by pressing the 

corresponding buttons

.

      Slight noise during playback pauses 
is not a construction defect, it is determined 
by the factory presets of the dynamic noise 
reduction system.