Telefunken TF-PS2102 - Инструкция по эксплуатации - Страница 5

Instruction Manual

4

USB/

MicroSD

 operation

Playback

Turn on the device.

Insert a microSD (TF) card into the slot.

Or insert a USB drive into the USB 

port. Press the 

M

 button repeatedly to 

select the USB or MicroSD mode.

• When playing, you can press

to play/pause the playback. 

• During the playback you can press

•

•

the 

  and 

 buttons to go to the previous 

and next track. 

Press and hold these 

buttons

 to adjust volume.

  It may take up to 60 seconds to open 

and verify a large microSD card / USB drive 

with many files.

•

This unit is equipped with a microSD slot

and USB port that can read and play MP3 
files stored on standard microSD cards and 
USB drives up to 32 GB.

•

FAT and FAT32 file system is supported

by this unit.

Never remove microSD cards and USB 

drives from the unit during playback, always 
stop playback, then press the 

M

 button to 

switch to another mode before removing the 
storage to prevent damage to your files and 
cards/drives themselves.

FM radio

Turn on the device.

• Once the search is finished, you can

•

•  Press the 

M

 button repeatedly to 

select the FM mode.

•  Press and hold       to automatically 

scan available radio stations. The 
procedure will take several 
minutes. Press      again to stop.

press the 

  and 

 buttons to go to a 

previous or next radio station. 

Press and 

hold these buttons to adjust volume

.

Microphone

• You can insert a microphone for

karaoke or other purposes into this unit by 
connecting it to the 6.3

5

mm microphone 

input jack.

• Press the 

BASS

 button

to 

enhance bass during playback

.

General 

USB/

MicroSD

 notes

Light

• Press the

LIGHT button

to switch the

mood lighting off and on.

TWS function

•

If you have two units at your

disposal, you can pair them to each other 
and enable the True Wireless (TWS)

stereo sound

.

•

Turn the both units on and

switch them into the Bluetooth mode. 
Press and hold PLAY on any of the units. 
A beep will sound, indicating that the unit 
is ready for TWS pairing. 
Keep holding PLAY for 5-10 seconds, you 
will hear another beep sound when the 
units are paired successfully.

       TWS works only in Bluetooth mode 
and does not work w

hen the microphone is 

inserted.